Mundorf
€18.70 IT/piece |
Mundorf CFC18 air copper foil coil, 0.47mH ±2%, 0.31ohm, 11.5x0.07mm OFC-copper wire, Ø45xH18mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC18-0,47
CFC18-0,47
|
Mundorf
€14.44 IT/piece |
Mundorf BL125 air core coil, 0.33mH ±2%, 0.18ohm, 1.25mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,33
BL125-0,33
|
Mundorf
€16.15 IT/piece |
Mundorf VLCU18 paper air copper foil coil, 0.12mH ±2%, 0.14ohm, 11.5x0.07mm OFC-copper wire, Ø35xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,12
VLCU18-0,12
|
Mundorf
€17.03 IT/piece |
Mundorf BP71 ferrite pipe core coil, 5.6mH ±3%, 1.46ohm, 0.71mm OFC-copper wire, Ø45xH30mm, with backed varnish wire
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system. 99.99% OFC copper backed varnish wire, glass fiber reinforced plastic body, ferrite / aronit core.
BP71-5,6
BP71-5,6
|
Mundorf
€20.48 IT/piece |
Mundorf BH125 ferrite core coil, 2.2mH ±3%, 0.17ohm, 1.25mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-2,2
BH125-2,2
|
Mundorf
€162.75 IT/piece |
Mundorf VN300 feron core coil, 2.7mH ±5%, 0.03ohm, 3.00mm OFC-copper wire, L106xH93xZ87mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN300-2,7
VN300-2,7
|
Mundorf
€78.76 IT/piece |
Mundorf VT125 feron core coil, 8.2mH ±3%, 0.43ohm, 1.25mm OFC-copper wire, L84xH60xZ60mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT125-8,2
VT125-8,2
|
Mundorf
€33.30 IT/piece |
Mundorf CFC14 air copper foil coil, 0.33mH ±2%, 0.13ohm, 28x0.07mm OFC-copper wire, Ø48xH34mm, with backed varnish wire
CFC14-0,33
CFC14-0,33
|