Mundorf
€8.55 IT/piece |
![]() |
Mundorf BP71 ferrite pipe core coil, 0.68mH ±3%, 0.36ohm, 0.71mm OFC-copper wire, Ø30xH23mm, with backed varnish wire
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system. 99.99% OFC copper backed varnish wire, glass fiber reinforced plastic body, ferrite / aronit core.
BP71-0,68
BP71-0,68
|
Mundorf
€197.03 IT/piece |
![]() |
Mundorf VN236 feron core coil, 12mH ±5%, 0.13ohm, 2.36mm OFC-copper wire, L106xH93xZ87mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€141.30 IT/piece |
![]() |
Mundorf VN180 feron core coil, 10mH ±5%, 0.16ohm, 1.80mm OFC-copper wire, L96xH86xZ84mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€137.03 IT/piece |
![]() |
Mundorf VL236 air core coil, 2.2mH ±2%, 0.22ohm, 2.36mm OFC-copper wire, L105xH79xZ93mm, with vaccum impregnated wire
VL236-2,2
VL236-2,2
|
Mundorf
€22.12 IT/piece |
![]() |
Mundorf VLCU18 paper air copper foil coil, 0.39mH ±2%, 0.28ohm, 11.5x0.07mm OFC-copper wire, Ø45xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,39
VLCU18-0,39
|
Mundorf
€9.00 IT/piece |
![]() |
Mundorf P100 ferrite pipe core coil, 0.33mH ±3%, 0.15ohm, 1.00mm OFC-copper wire, Ø30xH23mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P100-0,33
P100-0,33
|
Mundorf
€33.30 IT/piece |
![]() |
Mundorf BH125 aronit core coil, 6.8mH ±3%, 0.37ohm, 1.25mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-6,8
BH125-6,8
|
Mundorf
€291.30 IT/piece |
![]() |
Mundorf VN300 feron core coil, 10mH ±5%, 0.08ohm, 3.00mm OFC-copper wire, L130xH115xZ97mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |