Mundorf
€31.58 IT/piece |
Mundorf BH140 aronit core coil, 3.3mH ±3%, 0.2ohm, 1.40mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH140-3,3
BH140-3,3
|
Mundorf
€13.59 IT/piece |
Mundorf BL71 air core coil, 2.2mH ±2%, 1.39ohm, 0.71mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-2,20
BL71-2,20
|
Mundorf
€4.09 IT/piece |
Air core coil Mundorf BL71, 0.027mH ±2%, 0.1ohm, Ø10xL25mm, with backed varnish
BL71-0,027
BL71-0,027
|
Mundorf
€8.55 IT/piece |
Mundorf L50 air core coil, 2.2mH ±2%, 2.47ohm, 0.50mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-2,20
L50-2,20
|
Mundorf
€19.57 IT/piece |
Mundorf L125 air core coil, 0.82mH ±2%, 0.29ohm, 1.25mm OFC-copper wire, Ø58xH18mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L125-0,82
L125-0,82
|
Mundorf
€51.16 IT/piece |
Mundorf LL45 litz wire air core coil, 1.8mH ±2%, 0.56ohm, 7x0.45mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL45-1,8
LL45-1,8
|
Mundorf
€38.34 IT/piece |
Mundorf BL140 air core coil, 1.5mH ±2%, 0.38ohm, 1.40mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-1,50
BL140-1,50
|
Mundorf
€31.85 IT/piece |
iCore feron coil Mundorf BS140, 1.2mH ±3%, 0.1ohm, 84x27xH28mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.
BS140-1,20
BS140-1,20
|