Mundorf
€32.36 IT/piece |
Mundorf L125 air core coil, 2.2mH ±2%, 0.57ohm, 1.25mm OFC-copper wire, Ø70xH29mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L125-2,20
L125-2,20
|
Mundorf
€45.64 IT/piece |
Air core coil Mundorf L250, 1.2mH ±2%, 0.13ohm, 89x76xH61mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L250-1,20
L250-1,20
|
Mundorf
€34.08 IT/piece |
Mundorf BL100 air core coil, 4.7mH ±2%, 1.22ohm, 1.00mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-4,70
BL100-4,70
|
Mundorf
€26.81 IT/piece |
Mundorf BH100 aronit core coil, 8.2mH ±3%, 0.56ohm, 1.00mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH100-8,2
BH100-8,2
|
Mundorf
€38.57 IT/piece |
iCore feron coil Mundorf BS140, 2.7mH ±3%, 0.17ohm, 96x29xH29mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.
BS140-2,70
BS140-2,70
|
Mundorf
€48.11 IT/piece |
Air core coil Mundorf BL140, 3mH ±2%, 0.55ohm, Ø28xL77mm, with backed varnish
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-3,00
BL140-3,00
|
Mundorf
€93.84 IT/piece |
Mundorf LL45 litz wire air core coil, 4.7mH ±2%, 1.16ohm, 7x0.45mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL45-4,7
LL45-4,7
|
Mundorf
€7.26 IT/piece |
Mundorf L100 air core coil, 0.18mH ±2%, 0.19ohm, 1.00mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-0,18
L100-0,18
|