Mundorf
In stock |
Mundorf LL60 litz wire air core coil, 0.18mH ±2%, 0.1ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø22xL58mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,18
LL60-0,18
|
Mundorf
€42.61 IT/piece |
Mundorf LL60 litz wire air core coil, 0.68mH ±2%, 0.21ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø29xL70mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,68
LL60-0,68
|
Mundorf
€79.74 IT/piece |
iCore feron coil Mundorf BS140, 27mH ±3%, 0.67ohm, 130x41xH41mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
€6.33 IT/piece |
Mundorf BL71 air core coil, 0.18mH ±2%, 0.34ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,18
BL71-0,18
|
Mundorf
€11.69 IT/piece |
Pipe core coil Mundorf H100, 2mH ±3%, 0.19ohm, Ø25xL35mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H100-2,0
H100-2,0
|
Mundorf
€17.00 IT/piece |
Mundorf BL125 air core coil, 0.47mH ±2%, 0.22ohm, 1.25mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,47
BL125-0,47
|
Mundorf
€3.77 IT/piece |
Mundorf L50 air core coil, 0.18mH ±2%, 0.52ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,18
L50-0,18
|
Mundorf
€15.91 IT/piece |
Air core coil Mundorf L100, 3mH ±2%, 0.98ohm, Ø28xL58mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-3,00
L100-3,00
|