Mundorf
€35.85 IT/piece |
Mundorf VSCU15 feron core copper foil paper coil, 0.33mH ±3%, 0.05ohm, 1.40mm OFC-copper wire, L84xH28xZ28mm, with vaccum impregnated wire
VSCU15-0,33
VSCU15-0,33
|
Mundorf
€81.05 IT/piece |
Mundorf CFC16 air copper foil coil, 4.7mH ±2%, 0.93ohm, 17x0.07mm OFC-copper wire, Ø88xH24mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC16-4,70
CFC16-4,70
|
Mundorf
€8.12 IT/piece |
Mundorf L71 air core coil, 1mH ±2%, 0.88ohm, 0.71mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-1,00
L71-1,00
|
Mundorf
€34.08 IT/piece |
Mundorf BL71 air core coil, 12mH ±2%, 3.65ohm, 0.71mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |
Mundorf
€3.25 IT/piece |
Mundorf L50 air core coil, 0.1mH ±2%, 0.36ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,10
L50-0,10
|
Mundorf
€13.38 IT/piece |
Air core coil Mundorf L100, 2mH ±2%, 0.74ohm, Ø22xL58mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-2,00
L100-2,00
|
Mundorf
€15.90 IT/piece |
Mundorf H125 ferrite core coil, 1.5mH ±3%, 0.12ohm, 1.25mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H125-1,5
H125-1,5
|
Mundorf
€76.76 IT/piece |
Mundorf BS180 feron core coil, 4.7mH ±3%, 0.15ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 130x37xH37mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |