Mundorf
€13.59 IT/piece |
Mundorf BL100 air core coil, 0.56mH ±2%, 0.36ohm, 1.00mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-0,56
BL100-0,56
|
Mundorf
€18.70 IT/piece |
Mundorf BL140 air core coil, 0.33mH ±2%, 0.15ohm, 1.40mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-0,33
BL140-0,33
|
Mundorf
€32.70 IT/piece |
Mundorf H140 aronit core coil, 4.7mH ±3%, 0.25ohm, 1.40mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H140-4,7
H140-4,7
|
Mundorf
€15.05 IT/piece |
Mundorf H50 ferrite core coil, 27mH ±3%, 3.11ohm, 0.50mm OFC-copper wire, Ø30xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€5.30 IT/piece |
Mundorf BL71 air core coil, 0.068mH ±2%, 0.18ohm, 0.71mm OFC-copper wire, Ø25xH10mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,068
BL71-0,068
|
Mundorf
€25.53 IT/piece |
Mundorf LL45 litz wire air core coil, 0.39mH ±2%, 0.24ohm, 7x0.45mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL45-0,39
LL45-0,39
|
Mundorf
€37.74 IT/piece |
Mundorf H140 aronit core coil, 6.8mH ±3%, 0.33ohm, 1.40mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H140-6,8
H140-6,8
|
Mundorf
€38.34 IT/piece |
Mundorf LL45 litz wire air core coil, 1mH ±2%, 0.42ohm, 7x0.45mm OFC-copper wire, Ø58xH28mm, with backed varnish wire
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL45-1,0
LL45-1,0
|