Mundorf
€38.34 IT/piece |
![]() |
Mundorf LL45 litz wire air core coil, 1mH ±2%, 0.42ohm, 7x0.45mm OFC-copper wire, Ø58xH28mm, with backed varnish wire
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL45-1,0
LL45-1,0
|
Mundorf
€115.20 IT/piece |
![]() |
Mundorf LL60 litz wire air core coil, 2.2mH ±2%, 0.47ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø59xL70mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-2,20
LL60-2,20
|
Mundorf
€27.25 IT/piece |
![]() |
Mundorf CFC16 air copper foil coil, 0.56mH ±2%, 0.26ohm, 17x0.07mm OFC-copper wire, Ø50xH24mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC16-0,56
CFC16-0,56
|
Mundorf
€25.53 IT/piece |
![]() |
Mundorf L100 air core coil, 3.3mH ±2%, 1ohm, 1.00mm OFC-copper wire, Ø58xH28mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-3,30
L100-3,30
|
Mundorf
€11.87 IT/piece |
![]() |
Mundorf BL71 air core coil, 1.5mH ±2%, 1.11ohm, 0.71mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-1,50
BL71-1,50
|
Mundorf
€7.70 IT/piece |
![]() |
Mundorf L50 air core coil, 1.5mH ±2%, 1.98ohm, 0.50mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-1,50
L50-1,50
|
Mundorf
€26.81 IT/piece |
![]() |
Mundorf H100 aronit core coil, 12mH ±3%, 0.72ohm, 1.40mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€46.89 IT/piece |
![]() |
Mundorf BL125 air core coil, 3.9mH ±2%, 0.75ohm, 1.25mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-3,90
BL125-3,90
|