Mundorf
€47.03 IT/piece |
![]() |
Mundorf VL300 air core coil, 0.12mH ±2%, 0.03ohm, 3.00mm OFC-copper wire, Ø70xH29mm, with vaccum impregnated wire
VL300-0,12
VL300-0,12
|
Mundorf
€39.30 IT/piece |
![]() |
Mundorf BH140 aronit core coil, 5.6mH ±3%, 0.29ohm, 1.40mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH140-5,6
BH140-5,6
|
Mundorf
€282.75 IT/piece |
![]() |
Mundorf VN390 feron core coil, 3.3mH ±5%, 0.03ohm, 3.90mm OFC-copper wire, L130xH115xZ97mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN390-3,3
VN390-3,3
|
Mundorf
€63.97 IT/piece |
![]() |
Mundorf VLCU18 paper air copper foil coil, 4.7mH ±2%, 1.3ohm, 11.5x0.07mm OFC-copper wire, Ø91xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-4,7
VLCU18-4,7
|
Mundorf
€22.20 IT/piece |
![]() |
Mundorf P100 ferrite pipe core coil, 3.9mH ±3%, 0.71ohm, 1.00mm OFC-copper wire, Ø45xH30mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P100-3,9
P100-3,9
|
Mundorf
€17.00 IT/piece |
![]() |
Mundorf BL180 air core coil, 0.1mH ±2%, 0.05ohm, 1.80mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
BL180-0,10
BL180-0,10
|
Mundorf
€85.58 IT/piece |
![]() |
Mundorf VSCU12 feron core copper foil paper coil, 3.3mH ±3%, 0.11ohm, 1.98mm OFC-copper wire, L130xH55xZ55mm, with vaccum impregnated wire
VSCU12-3,3
VSCU12-3,3
|
Mundorf
€59.85 IT/piece |
![]() |
Mundorf VN140 feron core coil, 1.8mH ±5%, 0.1ohm, 1.40mm OFC-copper wire, L66xH61xZ63mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN140-1,8
VN140-1,8
|