Mundorf
€137.03 IT/piece |
Mundorf VT300 feron core coil, 1.5mH ±3%, 0.04ohm, 3.00mm OFC-copper wire, L106xH81xZ88mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT300-1,5
VT300-1,5
|
Mundorf
€154.20 IT/piece |
Mundorf CFC10 air copper foil coil, 0.68mH ±2%, 0.11ohm, 70x0.07mm OFC-copper wire, Ø65xH77mm, with backed varnish wire
CFC10-0,68
CFC10-0,68
|
Mundorf
€28.10 IT/piece |
Mundorf BL100 air core coil, 3.3mH ±2%, 1ohm, 1.00mm OFC-copper wire, Ø58xH28mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-3,30
BL100-3,30
|
Mundorf
€68.23 IT/piece |
Mundorf BL140 air core coil, 4.7mH ±2%, 0.77ohm, 1.40mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-4,70
BL140-4,70
|
Mundorf
€77.03 IT/piece |
Mundorf VL300 air core coil, 0.33mH ±2%, 0.05ohm, 3.00mm OFC-copper wire, Ø70xH59mm, with vaccum impregnated wire
VL300-0,33
VL300-0,33
|
Mundorf
€21.30 IT/piece |
Mundorf VLCU15 paper air copper foil coil, 0.1mH ±2%, 0.08ohm, 22x0.07mm OFC-copper wire, Ø37xH30mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU15-0,10
VLCU15-0,10
|
Mundorf
€11.85 IT/piece |
Mundorf BP100 ferrite pipe core coil, 0.47mH ±3%, 0.19ohm, 1.00mm OFC-copper wire, Ø30xH23mm, with backed varnish wire
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system. 99.99% OFC copper backed varnish wire, glass fiber reinforced plastic body, ferrite / aronit core.
BP100-0,47
BP100-0,47
|
Mundorf
€25.13 IT/piece |
Mundorf H180 aronit core coil, 0.68mH ±3%, 0.06ohm, 1.80mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H180-0,68
H180-0,68
|