Coaxial speaker Oberton 12CX, 8+16 ohm, 12 inch

Brand 
Oberton
Model 
12CX
SKU 
12CX-8+16
Manufacturer code 
12112F0108
Product type 
Coaxial driver with two entries
Sales packaging 
Sold by piece
Brand
Oberton
Model
12CX
TLHP code
12CX-8+16
Manufacturer code
12112F0108
Product type 
Coaxial driver with two entries
Sales packaging 
Sold by Piece
TLHP selling price
362.17IT/piece
excluding delivery service

Simulate shipping costs and VAT
In stock: 2 pieces

If you want to purchase more than the quantity in stock, have a look at the supply time below :

Indicative average supply lead time: 11 weeks
90 days to change your mind !
learn more
Qty

  • The 12CX is a 12" / 1.4" coaxial transducer designed for use in compact reflex enclosures and stage monitors with a nominal dispersion of 80 degrees.

    The low profile, smooth curvilinear LF cone provides smooth response within its intended frequency range and water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 77 mm (3 in) LF voice coil has Kapton former, which together with high temperature resistant resin ensure high reliability by high power. A triple aluminium demodulating rings on the magnet structure reduce distortion and inductance and improve transient response.

    The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end.
    The HF magnet structure has cooper ring on the pole piece, which reduces the inductance figure of frequencies above 10 kHz, improving phase and impedance linearisation. This ensures extremely high SPL in the high end of the frequency response.

    Application: Stage monitors and compact bass reflex boxes.

    KEY FEATURES :
    98 db SPL 1W / 1m ( LF ) average sensitivity
    77 mm ( 3") high temperature voice coil ( LF )
    700 W AES program power ( LF )
    Triple aluminium demodulating rings
    Single magnet assembly
    Double silicone spider
    Water protected cone
    1.4" exit HF compression driver
    72 mm (2.85") HF high temperature voice coil
    80 degrees nominal dispersion

General

Product type Coaxial driver with two entries
Brand Oberton
Reference 12CX
Product code 12112F0108

Informations

Nominal impedance 8+16 ohm
Dimensional category 12.5 inch
Manufacturer sensitivity 98 dB
Calculated sensitivity 95.17 dB
Nominal power handling 350 | 75 W
Bandwidth 60÷16000 Hz
Exit dimension 1.4 inch

Fundamental parameters

Mms 60.97 gr
Le 0.6 mH
Re 5.65 ohm

Small signal parameters

Fs 51.24 Hz
Qes 0.366
Qms 6.35
Qts 0.346
Vas 58.55 L

Datas

Xmax ±5.25 mm
EBP 140 Hz
Fs / Qts 148 Hz
Vas * Qts² 7.01 L
Calculated efficiency 2.07 %
Weight ~10.8 kg
Dispersion 80° x 80°

Dimensions

Voice coil diameter 3 | 2.8 inch
Outside diameter 315 mm
Baffle cutout diameter 280 mm
Front thickness 15.7 mm
Depth after front 180 mm
Diamètre aimant (mm) 220 mm

Shape & Materials

Front chape Cylindrical
Magnet type Ferrite


Question about Oberton 12CX-8+16

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


Informations Oberton 12CX-8+16

The 12CX is a 12" / 1.4" coaxial transducer designed for use in compact reflex enclosures and stage monitors with a nominal dispersion of 80 degrees.

The low profile, smooth curvilinear LF cone provides smooth response within its intended frequency range and water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 77 mm (3 in) LF voice coil has Kapton former, which together with high temperature resistant resin ensure high reliability by high power. A triple aluminium demodulating rings on the magnet structure reduce distortion and inductance and improve transient response.

The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end.
The HF magnet structure has cooper ring on the pole piece, which reduces the inductance figure of frequencies above 10 kHz, improving phase and impedance linearisation. This ensures extremely high SPL in the high end of the frequency response.

Application: Stage monitors and compact bass reflex boxes.

KEY FEATURES :
98 db SPL 1W / 1m ( LF ) average sensitivity
77 mm ( 3") high temperature voice coil ( LF )
700 W AES program power ( LF )
Triple aluminium demodulating rings
Single magnet assembly
Double silicone spider
Water protected cone
1.4" exit HF compression driver
72 mm (2.85") HF high temperature voice coil
80 degrees nominal dispersion
Manufacturer Oberton
Name Coaxial speaker Oberton 12CX, 8+16 ohm, 12 inch
SKU 12CX-8+16
Impedance 8+16 Ohm
Seller TLHP
Price 362.17 301.81
Availability In stock


All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes Oberton 12CX-8+16

SPL vs Impedance measure

Image spl vs impedance measure coaxial driver with two entries Oberton Coaxial speaker Oberton 12CX, 8+16 ohm, 12 inch

Dimensions

Image Drawing & Mounting coaxial driver with two entries Oberton Coaxial speaker Oberton 12CX, 8+16 ohm, 12 inch

Garantie

This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x