PHL Audio |
1670NdM-SQ2 |
1670NDM-SQ2-16 |
Cone driver |
Sold by piece |
|
Brand PHL Audio |
Model 1670NdM-SQ2 |
TLHP code 1670NDM-SQ2-16 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 14 weeks
General |
|
Product type | Cone driver |
Brand | PHL Audio |
Reference | 1670NdM-SQ2 |
Informations |
|
Product manufacturer range | Standard |
Nominal impedance | 16 ohm |
Dimensional category | 6.5 inch, 7.5 inch |
Frequency coverage type | High midrange, Aigu |
Manufacturer sensitivity | 97 dB |
Calculated sensitivity | 96.25 dB |
Nominal power handling | 250 W |
Bandwidth | 450÷5000 Hz |
Fundamental parameters |
|
Sd | 150 cm² |
Mms | 13 gr |
Cms | 21 µm/N |
Le | 1.66 mH |
Re | 11.6 ohm |
BL | 20 T.m |
Small signal parameters |
|
Fs | 305 Hz |
Qes | 0.72 |
Qms | 11.85 |
Qts | 0.68 |
Vas | 0.7 L |
Datas |
|
Xmax | ±2.5 mm |
Calculated Xmax | ±4.1667 mm |
EBP | 424 Hz |
Zmin | 13.8 ohm |
Fs / Qts | 449 Hz |
Vas * Qts² | 0.33 L |
Efficiency | 2.6 % |
Calculated efficiency | 2.65 % |
Weight | ~1.6 kg |
Air volume occupied by the driver | 0.85 L |
Closed speaker | Yes |
Dimensions |
|
Voice coil diameter | 2 inch |
Winding depth | 11 mm |
Gap height | 8 mm |
External dimensions | 163 | 187.5 mm |
Baffle cutout diameter | 156 mm |
Depth | 97.5 mm |
Front thickness | 8 mm |
Depth after front | 89.5 mm |
Diamètre aimant (mm) | 97.5 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Neodymium |
Winding material | CCAR (Flat ribbon copper-clad aluminium wire) |
Surround shape | Flat |
Surround material | Foam |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.