Shop By
Price
  1.  
    149
    528
Rms
  1.  
    0 kg/s
    2 kg/s
Cms
  1.  
    0 µm/N
    2790 µm/N
Sd
  1.  
    0 cm²
    255 cm²
Manufacturer sensitivity
  1.  
    0.00 dB
    97.00 dB
Calculated sensitivity
  1.  
    0.00 dB
    92.50 dB
Re
  1.  
    0 ohm
    7 ohm
Qts
  1.  
    0
    900
Calculated efficiency
  1.  
    0.00 %
    1.12 %
Vas
  1.  
    0 L
    88 L
Vas * Qts²
  1.  
    0 L
    13 L
Xmax
  1.  
    0.00 mm
    10.50 mm
Calculated Xmax
  1.  
    0.50 mm
    10.75 mm
Qms
  1.  
    0
    6700
Qes
  1.  
    0
    1300
BL
  1.  
    0.00 T.m
    10.45 T.m
Mms
  1.  
    0 gr
    45 gr
Depth
  1.  
    52 mm
    132 mm
Nominal power handling
  1.  
    0 W
    90 W
EBP
  1.  
    1 Hz
    985 Hz
Fs
  1.  
    0 Hz
    750 Hz
Fs / Qts
  1.  
    1 Hz
    779 Hz
Le
  1.  
    0 mH
    1 mH
Weight
  1.  
    0.0 kg
    3.9 kg

SATORI

Items 25 to 32 of 53 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7


SB Acoustics
SATORI_TW29R-BLK-4

149.51 IT/piece
In stock
Dome tweeter SB Acoustics Satori TW29R-B, impedance 4 ohm, voice coil 29 mm, noir
4 ohm
Dome tweeter SB Acoustics Satori TW29R-B, impedance 4 ohm, voice coil 29 mm, noir

SB Acoustics
SATORI_MR16PNW-4

196.45 IT/piece
In stock
Speaker SB Acoustics Satori MR16PNW-4, impedance 4 ohm, 6.5 inch
4 ohm
Speaker SB Acoustics Satori MR16PNW-4, impedance 4 ohm, 6.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet Mode balanced cone for reduced break-up

SB Acoustics
SATORI_TW29TXN-BLK-4

278.01 IT/piece
In stock
Dome tweeter SB Acoustics SATORI TW29TXN-B, impedance 4 ohm, voice coil 29 mm, noir
4 ohm
Dome tweeter SB Acoustics SATORI TW29TXN-B, impedance 4 ohm, voice coil 29 mm, noir

SB Acoustics
SATORI_MW13PNW-4

167.02 IT/piece
In stock
Speaker SB Acoustics Satori MW13PNW-4, impedance 4 ohm, 5 inch
4 ohm
Speaker SB Acoustics Satori MW13PNW-4, impedance 4 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

SB Acoustics
SATORI_MW13TX-8

279.29 IT/piece
In stock
Speaker SB Acoustics Satori MW13TX-8, impedance 8 ohm, 5 inch
8 ohm
Speaker SB Acoustics Satori MW13TX-8, impedance 8 ohm, 5 inch

SB Acoustics
SATORI_MW16PNW-8

177.37 IT/piece
In stock
Speaker SB Acoustics Satori MW16PNW-8, impedance 8 ohm, 6.5 inch
8 ohm
Speaker SB Acoustics Satori MW16PNW-8, impedance 8 ohm, 6.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

SB Acoustics
SATORI_MW19PNW-4

201.35 IT/piece
In stock
Speaker SB Acoustics Satori MW19PNW-4, impedance 4 ohm, 7.5 inch
4 ohm
Speaker SB Acoustics Satori MW19PNW-4, impedance 4 ohm, 7.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

SB Acoustics
SATORI_TW29BN-8

415.82 IT/piece
In stock
Dome tweeter SB Acoustics Satori TW29BN-8, impedance 8 ohm, voice coil 29 mm
8 ohm
Dome tweeter SB Acoustics Satori TW29BN-8, impedance 8 ohm, voice coil 29 mm

Items 25 to 32 of 53 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7



This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x