Speaker SB Acoustics Satori MW16TX-4 , impedance 4 ohm, 6.5 inch
|
SB Acoustics |
SATORI_MW16TX-4 |
Cone driver |
Sold by piece |
|
|
Brand SB Acoustics |
TLHP code SATORI_MW16TX-4 |
||
|
Product type Cone driver |
Sales packaging Sold by Piece |
|
|
4%
Simulate shipping costs and VAT
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 4 weeks
learn more
-
Advanced TeXtreme® cone
Vented aerodynamic cast aluminium chassis
Soft low damping rubber surround
Advanced BIMAX spider
Powerful optimized low distortion neodymium motor system
Extended copper sleeve on pole piece
Non-conducting fiberglass voice coil former
Vented pole piece and voice coil
Light weight CCAW voice coil
Long life silver lead wires
General |
|
| Product type | Cone driver |
| Brand | SB Acoustics |
Informations |
|
| Product manufacturer range | 6.5 inch, Midwoofer, Satori |
| Nominal impedance | 4 ohm |
| Dimensional category | 6.5 inch |
| Frequency coverage type | Sub |
| Manufacturer sensitivity | 90.5 dB |
| Calculated sensitivity | 87.91 dB |
| Nominal power handling | 60 W |
Fundamental parameters |
|
| Sd | 119 cm² |
| Mms | 12.6 gr |
| Cms | 2390 µm/N |
| Le | 0.15 mH |
| Re | 3.4 ohm |
| BL | 5.2 T.m |
Small signal parameters |
|
| Fs | 29 Hz |
| Qes | 0.29 |
| Qms | 5 |
| Qts | 0.27 |
| Vas | 48 L |
Datas |
|
| Flux density | 1.17 T |
| Xmax | ±7.67 mm |
| Calculated Xmax | ±7.6667 mm |
| EBP | 100 Hz |
| Fs / Qts | 107 Hz |
| Vas * Qts² | 3.5 L |
| Calculated efficiency | 0.39 % |
| Weight | ~1.3 kg |
| Demodulation ring | Yes |
Dimensions |
|
| Voice coil diameter | 1.42 inch |
| Winding depth | 17 mm |
| Gap height | 5 mm |
| Outside diameter | 165 mm |
| Baffle cutout diameter | 140.3 mm |
| Front thickness | 7.5 mm |
| Depth after front | 75.6 mm |
| Diamètre aimant (mm) | 70 mm |
Shape & Materials |
|
| Magnet type | Neodymium |
| Basket masterial | Aluminium |
| Winding material | CCAW (Copper-clad aluminium wire) |
| Voice coil former | Glass fiber |
| Surround shape | One roll |
| Surround material | Rubber |
| Spider material | Bimax |
Question about SB Acoustics SATORI_MW16TX-4
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
SB Acoustics SATORI_MW16TX-4, Range, version, replacement...
With SB Acoustics SATORI_MW16TX-4, customers has also bought
Informations SB Acoustics SATORI_MW16TX-4
Vented aerodynamic cast aluminium chassis
Soft low damping rubber surround
Advanced BIMAX spider
Powerful optimized low distortion neodymium motor system
Extended copper sleeve on pole piece
Non-conducting fiberglass voice coil former
Vented pole piece and voice coil
Light weight CCAW voice coil
Long life silver lead wires
Name Speaker SB Acoustics Satori MW16TX-4 , impedance 4 ohm, 6.5 inch
SKU SATORI_MW16TX-4
Price € 304.95 254.13
Availability In stock
Buy Speaker SB Acoustics Satori MW16TX-4 , impedance 4 ohm, 6.5 inch
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes SB Acoustics SATORI_MW16TX-4
SPL vs Impedance measure
Dimensions
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
