Search results for 'horn'

The T35C002 is a classic dome midrange tweeter with high sensitivity and a smooth, extended frequency response.

220 W continuous program power capacity 1.5" horn throat diameter 75 mm (3 in) aluminium voice coil Titanium diaphragm 500 - 18000 Hz response 107.5 dB sensitivity Shorting copper cap for extended HF response

Midrange transducer dedicated to the reproduction of 200-5000Hz frequencies. Equipped with a progressive wave diaphragm for precise transcription of the midrange band. Usable either for direct radiation in small volumes from 3L to 4L or for horn loaded application.

Extended driver, impedance 8 ohm, 10", Low Midrange Driver - High SPL - Very High Power Handling Capacity, usable either for direct radiation in extremely compact volume or for horn loaded application.

The ND640 is a high performance 2.5-inch diaphragm compression driver with a 1.4 inch exit throat featuring the smallest size of the art technology. The diaphragm are precision completely formed from pure titanium. Voice coil assembly is designed using high temperature kapton former and it is joined to the diaphragm by RCF proprietary Direct Drive kapton technology. Diaphragm suspension is designed by extensive FEM study for low distortion and low frequency range extension.

The 15G is a high performance 15" low frequency loudspeaker which achieving a bandwidth extension down to 40 Hz downwards. The 97 dB average sensitivity and peak power handling capability of 2800 W makes it one of the most popular D.A.S. loudspeakers. The 15G has been designed for use as a low bass or subwoofer component in either highly compact reflex, bandpass or horn loaded configurations.

The D.A.S. ND-10 is a 1.5" diameter exit Neodymium high frequency compression driver with a 100 mm (4") diameter voice coil. A pure titanium diaphragm is utilized, avoiding dome fracture due to mechanical fatigue, common in other diaphragm materials. The magnetic circuitry makes use of a rare-earth Neodymium magnet. This allows for greatly reduced component weight and easing of mounting requirements. The copper-clad aluminium voice coil is edge-wound and thermal bonded to a Kapton former, which ensures resistance to high temperatures. The 4-slit phase plug has been computer designed for coherent sound pressure summing at the throat. Manufactured out of aluminium, it acts as a heat sink for the voice coil, minimizing power compression and increasing power handling. Additionally, the 1.5" exit allows for direct coupling from the phase plug exit to the horn, greatly decreasing throat distortion at high drive levels.

Scoop flat pack ready to mount, with one speaker Oberton 18XB1500, rear loaded horn (RLH), 1500 watts power handling, impedance 8 ohm.