DAS |
ND-10 |
ND-10-16 |
Compression driver |
Sold by piece |
|
Brand DAS |
Model ND-10 |
TLHP code ND-10-16 |
||
Product type Compression driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 5 weeks
The D.A.S. ND-10 is a 1.5" diameter exit Neodymium high frequency compression driver with a 100 mm (4") diameter voice coil. A pure titanium diaphragm is utilized, avoiding dome fracture due to mechanical fatigue, common in other diaphragm materials. The magnetic circuitry makes use of a rare-earth Neodymium magnet. This allows for greatly reduced component weight and easing of mounting requirements. The copper-clad aluminium voice coil is edge-wound and thermal bonded to a Kapton former, which ensures resistance to high temperatures. The 4-slit phase plug has been computer designed for coherent sound pressure summing at the throat. Manufactured out of aluminium, it acts as a heat sink for the voice coil, minimizing power compression and increasing power handling. Additionally, the 1.5" exit allows for direct coupling from the phase plug exit to the horn, greatly decreasing throat distortion at high drive levels.
Technical Data:
AES Power Capacity 125 W (+1 kHz)
Program Power Capacity 250 W (+1 kHz)
On-axis Sensitivity 1 W / 1 m 110 dB SPL
Nominal Impedance 16 ohms
Nominal Frequency Range 500 Hz-20 kHz
Minimum X-over Frequency 500 Hz
Throat Exit Diameter 1.5 in
Diaphragm Type Titanium
Voice Coil Winding Aluminum ACCW
Voice Coil Diameter 100 mm (3.95 in)
Magnetics Neodymium
Flux Density 1.9 T (19 kG)
General |
|
Product type | Compression driver |
Brand | DAS |
Reference | ND-10 |
Product code | ND-10 |
Informations |
|
Nominal impedance | 16 ohm |
Manufacturer sensitivity | 110 dB |
Nominal power handling | 125 W |
Bandwidth | 500÷20000 Hz |
Exit dimension | 1.5 inch |
Datas |
|
Weight | ~4.5 kg |
Shape & Materials |
|
Magnet type | Neodymium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
* Shows the on-axis (black) and 45-degree (grey) frequency response at 1m of a unit flush on a measurement baffle and radiating to an anechoic environment and driven by a 2.83 V swept sine signal.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.