B&C Speakers |
14CXN88 |
14CXN88-8+8 |
ALT14CXN888 |
Coaxial driver with two entries |
Sold by piece |
|
Brand B&C Speakers |
Model 14CXN88 |
TLHP code 14CXN88-8+8 |
Manufacturer code ALT14CXN888 |
||
Product type Coaxial driver with two entries |
Sales packaging Sold by Piece |
|
As a practical compromise between our 12-inch and 15-inch alternatives, the 14CXN88 coaxial (which is actually 13.5-inches in diameter) offers better low frequency output than a 12-inch coaxial, but more balanced midrange performance than a 15-inch coaxial.
New to the large format coaxial family is the 14CXN88. Like the 12CXN88 and 15CXN88, that were introduced in the spring of 2017, this new 14" addition features an 88mm voice coil woofer and 75mm diaphragm high frequency driver. This motor combination offers an excellent balance between HF and LF output.
1000 W continuous program power capacity
80° nominal coverage
45 - 18000 Hz response
99 dB sensitivity
Single Neodymium magnet assembly
Aluminium demodulating ring allows a very low distortion figure
Double silicone spider with optimized compliance
General |
|
Product type | Coaxial driver with two entries |
Brand | B&C Speakers |
Reference | 14CXN88 |
Product code | ALT14CXN888 |
Informations |
|
Nominal impedance | 8+8 ohm |
Dimensional category | 14 inch |
Manufacturer sensitivity | 99 | 106 dB |
Calculated sensitivity | 97.42 dB |
Nominal power handling | 500 | 160 W |
Bandwidth | 45÷18000 Hz |
Recommended min cutoff frequency | 1200 Hz |
Fundamental parameters |
|
Sd | 707 cm² |
Mms | 83 gr |
Le | 0.95 mH |
Re | 4.7 ohm |
BL | 20.7 T.m |
Small signal parameters |
|
Fs | 46 Hz |
Qes | 0.27 |
Qms | 13 |
Qts | 0.26 |
Vas | 100 L |
Datas |
|
Flux density | 1.05 | 1.75 T |
Xmax | ±8.5 mm |
Calculated Xmax | ±9.3333 mm |
EBP | 170 Hz |
Zmin | 6.8 ohm |
Zmin N°2 | 8.8 ohm |
Fs / Qts | 177 Hz |
Vas * Qts² | 6.76 L |
Efficiency | 3.6 % |
Calculated efficiency | 3.47 % |
Weight | ~7.3 kg |
Dispersion | 80° x 80° |
Horn technology | Speaker cone |
Dimensions |
|
Voice coil diameter | 3.5 | 3 inch |
Winding depth | 22 mm |
Gap height | 10 mm |
Outside diameter | 359 mm |
Baffle cutout diameter | 325 mm |
Front thickness | 15 mm |
Depth after front | 185 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
Basket masterial | Aluminium |
Winding material | Aluminium |
Voice coil former | Glass fiber |
Winding material | Aluminium |
Diaphragm material | Titanium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.