RCF |
LF18N408 |
LF18N408-8 |
11100145 |
Cone driver |
Sold by piece |
|
Brand RCF |
Model LF18N408 |
TLHP code LF18N408-8 |
Manufacturer code 11100145 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 3 weeks
The LF18N408 is an extended low frequency with high power handling, designed to provide powerful and accurate bass frequencies with low distortion, low power compression and very high SPL.
The LF18N408 uses a fibre loaded cone assembly along a large triple roll surround, this combination provides remarkable strength and control. The single spider system is specifically designed with a heavy cloth which ensures excellent control during large excursions. A fully optimized T-pole together with double demodulating rings are designed to reduce flux modulations with benefits on harmonic and intermodulation distortions while improving the transient response. The Dual-forced air venting magnetic structure system provides a very efficient voice coil ventilation to minimize the power compression.
General |
|
Product type | Cone driver |
Brand | RCF |
Reference | LF18N408 |
Product code | 11100145 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 18 inch |
Frequency coverage type | Sub, Low |
Manufacturer sensitivity | 97 dB |
Calculated sensitivity | 93.45 dB |
Nominal power handling | 1500 W |
Max power handling | 3000 W |
Bandwidth | 25÷1000 Hz |
Fundamental parameters |
|
Sd | 1220 cm² |
Mms | 284 gr |
Le | 1.56 mH |
Re | 4.3 ohm |
BL | 25.7 T.m |
Small signal parameters |
|
Fs | 30 Hz |
Qes | 0.36 |
Qms | 3.6 |
Qts | 0.33 |
Vas | 193 L |
Datas |
|
Xmax | ±15 mm |
EBP | 83 Hz |
Zmin | 6 ohm |
Fs / Qts | 91 Hz |
Vas * Qts² | 21.02 L |
Efficiency | 1.57 % |
Calculated efficiency | 1.39 % |
Weight | ~11.4 kg |
Air volume occupied by the driver | 5.5 L |
Demodulation ring | Yes |
Dimensions |
|
Voice coil diameter | 4 inch |
Outside diameter | 465 mm |
Baffle cutout diameter | 424 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
Basket masterial | Aluminium |
Winding material | Copper |
Surround shape | Triple roll |
Surround material | Cloth |
Cone shape | Curvilinear |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.