Visaton |
TIW 250 XS - 8 OHM |
TIW 250 XS-8 |
1342 |
Cone driver |
Sold by piece |
|
Brand Visaton |
Model TIW 250 XS - 8 OHM |
TLHP code TIW 250 XS-8 |
Manufacturer code 1342 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 3 weeks
25 cm (10") high-end woofer.
The extra-wide elastic surround, the long voice coil and particularly large magnet arrangement give this speaker extremely long excursion.
Thanks to the multiple venting of the voice coil (pole piece hole, holes in the pole piece plate, cutouts in the aluminium diecast basket to vent the spider from behind) losses and flow noise are minimised. The capton voice coil carrier and the long voice coil enable the driver to withstand considerable loads.
The diaphragm is a sandwich construction made up of layers of fibreglass and polyester fabric which makes it particularly and low in resonance.
These design features result in high level-accuracy and excellent low-range bass imaging.
General |
|
Product type | Cone driver |
Brand | Visaton |
Reference | TIW 250 XS - 8 OHM |
Product code | 1342 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 10.5 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 89 dB |
Calculated sensitivity | 90.16 dB |
Nominal power handling | 200 W |
Max power handling | 300 W |
Bandwidth | 33÷3000 Hz |
Fundamental parameters |
|
Sd | 314 cm² |
Mms | 49 gr |
Le | 1.7 mH |
Re | 5.6 ohm |
BL | 13 T.m |
Small signal parameters |
|
Fs | 33 Hz |
Qes | 0.35 |
Qms | 5.21 |
Qts | 0.33 |
Vas | 66 L |
Datas |
|
Flux density | 1.3 T |
Xmax | ±11.17 mm |
Calculated Xmax | ±11.1667 mm |
Xvar, Xmech, Xlim | ±14 mm |
EBP | 94 Hz |
Fs / Qts | 100 Hz |
Vas * Qts² | 7.19 L |
Calculated efficiency | 0.66 % |
Weight | ~5.3 kg |
Dimensions |
|
Voice coil diameter | 1.97 inch |
Winding depth | 25 mm |
Gap height | 8 mm |
Outside diameter | 264 mm |
Baffle cutout diameter | 235 mm |
Front thickness | 6.2 mm |
Depth after front | 115 mm |
Diamètre aimant (mm) | 155 mm |
Shape & Materials |
|
Magnet type | Ferrite |
Basket masterial | Aluminium |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.