Visaton |
WF 130 ND |
WF 130 ND-8 |
9051 |
Cone driver |
Sold by piece |
|
Brand Visaton |
Model WF 130 ND |
TLHP code WF 130 ND-8 |
Manufacturer code 9051 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 3 weeks13 cm (5") low-midrange driver with Polypropylen membran, neodymium magnet and rubber surround which is suited well for uses where very low installation depth and low weight is required but good sound cannot be renounced in the bass and midrange tone area. The basket front has an integrated fabric grille, which makes a real grille unnecessary and protects at the same time the usually bare airgap, as well as the voice coil.
General |
|
Product type | Cone driver |
Brand | Visaton |
Reference | WF 130 ND |
Product code | 9051 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 5 inch, 6 inch |
Frequency coverage type | Low, Midbass, Midrange |
Manufacturer sensitivity | 84 dB |
Calculated sensitivity | 82.49 dB |
Nominal power handling | 40 W |
Max power handling | 60 W |
Bandwidth | 56÷10000 Hz |
Fundamental parameters |
|
Sd | 94 cm² |
Mms | 11.7 gr |
Le | 0.76 mH |
Re | 6.7 ohm |
BL | 5.39 T.m |
Small signal parameters |
|
Fs | 46 Hz |
Qes | 0.89 |
Qms | 2.97 |
Qts | 0.69 |
Vas | 10.6 L |
Datas |
|
Flux density | 1.17 T |
Xmax | ±3.13 mm |
Calculated Xmax | ±3.1333 mm |
Xvar, Xmech, Xlim | ±8.1 mm |
EBP | 52 Hz |
Fs / Qts | 67 Hz |
Vas * Qts² | 5.05 L |
Calculated efficiency | 0.12 % |
Weight | ~0.26 kg |
Dimensions |
|
Voice coil diameter | 1.01 inch |
Winding depth | 7.6 mm |
Gap height | 4 mm |
External dimensions | 134.4 | 148.5 mm |
Baffle cutout diameter | 123 mm |
Front thickness | 13.4 mm |
Depth after front | 19.4 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Neodymium |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.