Fostex |
P800K |
P800K-8 |
Cone driver |
Sold by piece |
|
Brand Fostex |
Model P800K |
TLHP code P800K-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 14 weeks
Fullranger driver with a paper cone and a high-loss rubber surround, 8 ohm impedance.
A light-weight cone paper and a high-loss rubber edge realize a bright and clear mid-to-high range and reasonably damped low range reproduction. You can enjoy an excellent stereo image and sound field achieved by a small-diameter speaker unit.
Main features
Banana pulp blended light-weight cone paper / High-loss foamed rubber edge
Blending a banana pulp with two wooden pulps holding different physicality realizes a sufficient stiffness and high-loss. A high-loss foamed edge with an up-roll shape is employed.
"Mechanical" 2-way center cap
The same material as the cone paper is employed on the center cap for improving the sound unification. A mechanical 2-way structure which directly connects the center cap with the voice coil bobbin extends a high range sound reproduction further.
Faston 205 terminal
A Faston 205 type is used for the speaker input terminal.
General |
|
Product type | Cone driver |
Brand | Fostex |
Reference | P800K |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 3 inch |
Frequency coverage type | Fullrange |
Manufacturer sensitivity | 84.5 dB |
Calculated sensitivity | 82.6 dB |
Nominal power handling | 8 W |
Bandwidth | 115÷18000 Hz |
Fundamental parameters |
|
Mms | 2.2 gr |
Le | 0.037 mH |
Re | 7.2 ohm |
Small signal parameters |
|
Fs | 115 Hz |
Qes | 1.334 |
Qms | 3.79 |
Qts | 0.99 |
Vas | 1.043 L |
Datas |
|
Xmax | ±0.5 mm |
EBP | 86 Hz |
Fs / Qts | 116 Hz |
Vas * Qts² | 1.03 L |
Efficiency | 0.117 % |
Calculated efficiency | 0.12 % |
Weight | ~0.35 kg |
Dimensions |
|
Voice coil diameter | 0.8 inch |
External dimensions | 79.5 | 79.5 mm |
Baffle cutout diameter | 70 mm |
Front thickness | 2.9 mm |
Depth after front | 44.5 mm |
Diamètre aimant (mm) | 55 mm |
Shape & Materials |
|
Front chape | Square |
Magnet type | Ferrite |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.