Monacor |
MS-130 |
MS-130-8 |
Cone driver |
Sold by piece |
|
Brand Monacor |
Model MS-130 |
TLHP code MS-130-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 4 weeks
Haut-parleur de médium Hi-Fi, 80 WMAX, 40 WRMS, 8 ?
Suspension inversée
Bobine mobile
Faible masse mobile pour un comportement impulsionnel optimal
Pour des combinaisons avec une tenue en niveau importante
General |
|
Product type | Cone driver |
Brand | Monacor |
Reference | MS-130 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 5.5 inch |
Frequency coverage type | Midbass, Midrange, High midrange |
Manufacturer sensitivity | 94 dB |
Calculated sensitivity | 88.74 dB |
Nominal power handling | 40 W |
Max power handling | 80 W |
Bandwidth | 120÷8000 Hz |
Fundamental parameters |
|
Sd | 70 cm² |
Mms | 4 gr |
Cms | 440 µm/N |
Le | 0.25 mH |
Re | 6.1 ohm |
BL | 4.2 T.m |
Small signal parameters |
|
Fs | 120 Hz |
Qes | 1.06 |
Qms | 5.23 |
Qts | 0.88 |
Vas | 3 L |
Datas |
|
Xmax | ±0.7 mm |
EBP | 113 Hz |
Fs / Qts | 136 Hz |
Vas * Qts² | 2.33 L |
Calculated efficiency | 0.47 % |
Dimensions |
|
Voice coil diameter | 1 inch |
External dimensions | 135 | 135 mm |
Baffle cutout diameter | 120 mm |
Depth | 70 mm |
Front thickness | 3 mm |
Depth after front | 67 mm |
Diamètre aimant (mm) | 100 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
Voice coil former | Kapton |
ANGELO on 4/6/22
Hallo, I have sent a question in franzais, now I try with english...that is: what is the true sensibility of Monacor MS130? Data sheet and yours calculation are very different..
Response:
Both is real but in different way.
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.