18 Sound HD1030 compression driver, 8 ohm, 1 inch exit
|
Eighteen Sound |
HD1030 |
HD1030-8 |
DRV101030TI08FB - 0421M8H810 |
Compression driver |
Sold by piece |
|
|
Brand Eighteen Sound |
Model HD1030 |
TLHP code HD1030-8 |
Manufacturer code DRV101030TI08FB - 0421M8H810 |
||
|
Product type Compression driver |
Sales packaging Sold by Piece |
|
|||
36%
Simulate shipping costs and VAT
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 11 weeks
learn more
-
The HD1030 1 inch exit high frequency compression driver has been designed for use in two-way audio systems.
The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at 1800Hz and is capable of 60W continuous power handling with a 1800Hz pink-noise signal, and a 6dB crest factor with a minimum 12dB/oct crossover slope.
Equipped with unique Phase Plug architecture, the HD1030 has been designed to give a smooth coherent wavefront at the horn entrance in the whole working frequency range, as well as high level manufacturing consistency. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction.
The titanium diaphragm assembly, with its ellipsoidal suspension shape, exhibits a constant slope response from 1.5kHz up to 18kHz with uniform smooth roll-off behavior. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in higher moisture content environments.
The HD1030 powerful ceramic magnet assembly has been designed to obtain 15 KGauss in the gap within a compact ferrite motor structure.
1 inch exit throat
106 dB SPL 1W / 1m average sensitivity
34,4 mm (1 1/3 inch) voice coil diameter
60 Watt program power handling
Titanium diaphragm
Proprietary phase plug design
Usable in two way or multiway systems
General |
|
| Product type | Compression driver |
| Brand | Eighteen Sound |
| Reference | HD1030 |
| Product code | DRV101030TI08FB - 0421M8H810 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 3.5 inch |
| Manufacturer sensitivity | 106 dB |
| Nominal power handling | 30 W |
| Max power handling | 60 W |
| Bandwidth | 1800÷20000 Hz |
| Recommended min cutoff frequency | 1800 Hz |
| Exit dimension | 1.0 inch |
Datas |
|
| Flux density | 1.5 T |
| Zmin | 6.5 ohm |
| Weight | ~1 kg |
Dimensions |
|
| Voice coil diameter | 1.35 inch |
| Outside diameter | 91 mm |
| Depth | 51 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Eighteen Sound HD1030-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Eighteen Sound HD1030-8, Range, version, replacement...
Repair Eighteen Sound HD1030-8
With Eighteen Sound HD1030-8, customers has also bought
Informations Eighteen Sound HD1030-8
The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at 1800Hz and is capable of 60W continuous power handling with a 1800Hz pink-noise signal, and a 6dB crest factor with a minimum 12dB/oct crossover slope.
Equipped with unique Phase Plug architecture, the HD1030 has been designed to give a smooth coherent wavefront at the horn entrance in the whole working frequency range, as well as high level manufacturing consistency. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction.
The titanium diaphragm assembly, with its ellipsoidal suspension shape, exhibits a constant slope response from 1.5kHz up to 18kHz with uniform smooth roll-off behavior. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in higher moisture content environments.
The HD1030 powerful ceramic magnet assembly has been designed to obtain 15 KGauss in the gap within a compact ferrite motor structure.
1 inch exit throat
106 dB SPL 1W / 1m average sensitivity
34,4 mm (1 1/3 inch) voice coil diameter
60 Watt program power handling
Titanium diaphragm
Proprietary phase plug design
Usable in two way or multiway systems
Name 18 Sound HD1030 compression driver, 8 ohm, 1 inch exit
SKU HD1030-8
Price € 84.48 70.4
Availability In stock
Buy 18 Sound HD1030 compression driver, 8 ohm, 1 inch exit
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
