Mundorf BS
Series of coils on feron I stick core, very stable baked varnished copper conductor, ideal for passive filtering of low frequencies, accepts more power than the H series, tolerance +/- 3%.
Mundorf
Unavailable |
|
Mundorf BS125 feron core coil, 15mH ±3%, 0.57ohm, 1.25mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 106x36xH36mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
|
Mundorf BS125 feron core coil, 3.3mH ±3%, 0.23ohm, 1.25mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 84x30xH30mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
|
Mundorf BS71 feron core coil, 6.8mH ±3%, 0.86ohm, 0.71mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x25xH25mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
|
Mundorf BS125 feron core coil, 8.2mH ±3%, 0.39ohm, 1.25mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 96x32xH32mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
|
Mundorf BS180 feron core coil, 10mH ±3%, 0.23ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 150x41xH41mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
Unavailable |
|
Mundorf BS100 feron core coil, 1.2mH ±3%, 0.19ohm, 1mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x20xH20mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
