Mundorf BS

Mundorf BS100 feron core coil, 1mH ±3%, 0.16ohm, 1mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x20xH20mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Mundorf BS180 feron core coil, 2.2mH ±3%, 0.1ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 106x34xH34mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Mundorf BS100 feron core coil, 12mH ±3%, 0.71ohm, 1mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 84x33xH33mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Mundorf BS100 feron core coil, 3.3mH ±3%, 0.32ohm, 1mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x23xH23mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

iCore feron coil Mundorf BS140, 2mH ±3%, 0.14ohm, 84x28xH28mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Mundorf BS180 feron core coil, 5.6mH ±3%, 0.17ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 130x37xH37mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Mundorf BS125 feron core coil, 2.7mH ±3%, 0.21ohm, 1.25mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x21xH21mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Mundorf BS71 feron core coil, 3.9mH ±3%, 0.62ohm, 0.71mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x25xH25mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.