18 Sound HD1050 compression driver, 8 ohm, 1 inch exit
|
Eighteen Sound |
HD1050 |
HD1050-8 |
DRV101050TP08FA - 0421081050 |
Compression driver |
Sold by piece |
|
|
Brand Eighteen Sound |
Model HD1050 |
TLHP code HD1050-8 |
Manufacturer code DRV101050TP08FA - 0421081050 |
||
|
Product type Compression driver |
Sales packaging Sold by Piece |
|
|||
36%
Simulate shipping costs and VAT
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 11 weeks
learn more
-
The HD1050 one inch exit high frequency compression driver has been designed for use in high quality audio systems.
Equipped with Eighteen Sound proprietary Phase Plug architecture, the HD1050 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction.
The diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,6kHz. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton.
This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments. The HD1050 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap and within a compact ferrite motor structure.
107 dB SPL 1W / 1m average sensitivity
1 inch exit throat
44 mm (1 3/4 inch) voice coil diameter
100 Watt program power handling
Titanium dome over PEN suspension
Proprietary phase plug design
General |
|
| Product type | Compression driver |
| Brand | Eighteen Sound |
| Reference | HD1050 |
| Product code | DRV101050TP08FA - 0421081050 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 4.5 inch |
| Manufacturer sensitivity | 107 dB |
| Nominal power handling | 50 W |
| Max power handling | 100 W |
| Bandwidth | 1600÷20000 Hz |
| Recommended min cutoff frequency | 1400 Hz |
| Exit dimension | 1.0 inch |
Datas |
|
| Flux density | 1.6 T |
| Zmin | 7 ohm |
| Weight | ~1.6 kg |
Dimensions |
|
| Voice coil diameter | 1.75 inch |
| Outside diameter | 110 mm |
| Depth | 60.5 mm |
| Driver dimensions mouting holes | 6.0 mm |
| Driver mounting system | 4 points on diameter 76 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Diaphragm material | Titanium + Polyethylene naphthalate |
Question about Eighteen Sound HD1050-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Eighteen Sound HD1050-8, Range, version, replacement...
Repair Eighteen Sound HD1050-8
With Eighteen Sound HD1050-8, customers has also bought
Informations Eighteen Sound HD1050-8
Equipped with Eighteen Sound proprietary Phase Plug architecture, the HD1050 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction.
The diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,6kHz. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton.
This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments. The HD1050 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap and within a compact ferrite motor structure.
107 dB SPL 1W / 1m average sensitivity
1 inch exit throat
44 mm (1 3/4 inch) voice coil diameter
100 Watt program power handling
Titanium dome over PEN suspension
Proprietary phase plug design
Name 18 Sound HD1050 compression driver, 8 ohm, 1 inch exit
SKU HD1050-8
Price € 118.27 98.56
Availability In stock
Buy 18 Sound HD1050 compression driver, 8 ohm, 1 inch exit
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
