Speaker Audax HT210G10, 4 ohm, 8.43 inch

Brand 
Audax
Model 
HT210G10
SKU 
HT210G10-4
Manufacturer code 
102125K
Product type 
Cone driver
Brand
Audax
Model
HT210G10
TLHP code
HT210G10-4
Manufacturer code
102125K
Product type 
Cone driver

Unavailable

  • Progressive rolls spider "Long Neck Process". Bumped back plate for long excursion. Large rubber surround. Flat copper wire. Kapton former. Heavy Gauge Stamped Steel Chassis. Ideal for Home cinema or car subwoofer.

General

Product type Cone driver
Brand Audax
Reference HT210G10
Product code 102125K

Informations

Nominal impedance 4 ohm
Dimensional category 8.5 inch
Frequency coverage type Low
Manufacturer sensitivity 88 dB
Calculated sensitivity 87.94 dB
Nominal power handling 100 W

Fundamental parameters

Sd 219.04 cm²
Mms 39.03 gr
Cms 238 µm/N
Le 1.08 mH
Re 3.09 ohm
BL 8.39 T.m

Small signal parameters

Fs 52.2 Hz
Qes 0.56
Qms 7.73
Qts 0.52
Vas 16 L

Datas

Flux density 1.2 T
Xmax ±4.5 mm
Calculated Xmax ±6.35 mm
EBP 93 Hz
Zmin 3.5 ohm
Fs / Qts 100 Hz
Vas * Qts² 4.33 L
Calculated efficiency 0.4 %
Weight ~2.9 kg

Dimensions

Voice coil diameter 1.46 inch
Winding depth 14.7 mm
Gap height 6 mm
Outside diameter 214 mm
Baffle cutout diameter 182 mm
Front thickness 10 mm
Depth after front 91 mm
Diamètre aimant (mm) 123 mm

Shape & Materials

Front chape Cylindrical
Magnet type Ferrite
Basket masterial Acier
Winding material Copper
Voice coil former Kapton
Surround material Rubber


Question about Audax HT210G10-4

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


Informations Audax HT210G10-4

Progressive rolls spider "Long Neck Process". Bumped back plate for long excursion. Large rubber surround. Flat copper wire. Kapton former. Heavy Gauge Stamped Steel Chassis. Ideal for Home cinema or car subwoofer.

All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes Audax HT210G10-4

SPL vs Impedance measure

Image spl vs impedance measure cone driver Audax Speaker Audax HT210G10, 4 ohm, 8.43 inch

Dimensions

Image Drawing & Mounting cone driver Audax Speaker Audax HT210G10, 4 ohm, 8.43 inch
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x