Speaker Beyma 118NdW, 8 ohm, 18 inch
|
Beyma |
118NdW |
118NdW-8 |
Cone driver |
|
|
Brand Beyma |
Model 118NdW |
TLHP code 118NdW-8 |
|
|
Product type Cone driver |
|
||
-
Exceptional power handling: 700 w AES
4.5" (114 mm.) edgewound copper ribbon voice coil
High sensitivity: 98 dB
High performance neodymium magnet system
Half the weight than a conventional ferrite model
Dual spider configuration of improved temperature behaviour
Large Xmax: 7 mm.
Extra vented magnetic structure
Designed for subwoofer and woofer applications
This 18" long excursion, lightweight bass loudspeaker has been specifically designed to deliver high impact bass response with an unusual power handling capacity (700 w AES). The magnetic structure incorporates a powerful neodymium magnet, reducing the total mass of the unit to less than 50% of a conventional ferrite model.
The power capacity is improved by the use of an edgewound copper ribbon voice coil (4.5" diameter) and extra vented magnetic structure. The 118Nd/W is highly recommended for high demanding subwoofer and woofer applications.
General |
|
| Product type | Cone driver |
| Brand | Beyma |
| Reference | 118NdW |
Informations |
|
| Nominal impedance | 8 ohm |
Datas |
|
| Weight | ~9.7 kg |
Question about Beyma 118NdW-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Beyma 118NdW-8
4.5" (114 mm.) edgewound copper ribbon voice coil
High sensitivity: 98 dB
High performance neodymium magnet system
Half the weight than a conventional ferrite model
Dual spider configuration of improved temperature behaviour
Large Xmax: 7 mm.
Extra vented magnetic structure
Designed for subwoofer and woofer applications
This 18" long excursion, lightweight bass loudspeaker has been specifically designed to deliver high impact bass response with an unusual power handling capacity (700 w AES). The magnetic structure incorporates a powerful neodymium magnet, reducing the total mass of the unit to less than 50% of a conventional ferrite model.
The power capacity is improved by the use of an edgewound copper ribbon voice coil (4.5" diameter) and extra vented magnetic structure. The 118Nd/W is highly recommended for high demanding subwoofer and woofer applications.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Beyma 118NdW-8
SPL measure *
* On axis frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber
Impedance measure
Simulation *
* Bass-reflex cabinet
