Speaker Beyma 18P1000FeV2/S, 8 ohm, 18 inch
|
Beyma |
18P1000FeV2/S |
18P1000FEV2/S-8 |
118P10FEV2S8 |
Cone driver |
|
|
Brand Beyma |
Model 18P1000FeV2/S |
TLHP code 18P1000FEV2/S-8 |
Manufacturer code 118P10FEV2S8 |
|
|
Product type Cone driver |
|
|||
Unavailable
General |
|
| Product type | Cone driver |
| Brand | Beyma |
| Reference | 18P1000FeV2/S |
| Product code | 118P10FEV2S8 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 18 inch |
| Frequency coverage type | Sub, Low |
| Manufacturer sensitivity | 98 dB |
| Calculated sensitivity | 95.83 dB |
| Nominal power handling | 120 W |
| Max power handling | 2400 W |
| Bandwidth | 30÷2000 Hz |
Fundamental parameters |
|
| Sd | 1250 cm² |
| Mms | 221 gr |
| Cms | 105 µm/N |
| Rms | 4.4 kg/s |
| Le | 1.75 mH |
| Re | 5.2 ohm |
| BL | 26.8 T.m |
Small signal parameters |
|
| Fs | 33 Hz |
| Qes | 0.33 |
| Qms | 10.5 |
| Qts | 0.32 |
| Vas | 230 L |
Datas |
|
| Xmax | ±8 mm |
| Calculated Xmax | ±8.5 mm |
| Xvar, Xmech, Xlim | ±26 mm |
| EBP | 100 Hz |
| Zmin | 5.5 ohm |
| Fs / Qts | 103 Hz |
| Vas * Qts² | 23.56 L |
| Efficiency | 2.4 % |
| Calculated efficiency | 2.41 % |
| Weight | ~13.5 kg |
Dimensions |
|
| Voice coil diameter | 4 inch |
| Winding depth | 21 mm |
| Gap height | 12 mm |
| Outside diameter | 461 mm |
| Baffle cutout diameter | 415 mm |
| Depth | 212 mm |
| Front thickness | 17 mm |
| Depth after front | 195 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Winding material | Copper |
| Surround shape | Triple roll |
| Surround material | Cloth |
Question about Beyma 18P1000FEV2/S-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Beyma 18P1000FEV2/S-8
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Beyma 18P1000FEV2/S-8
SPL vs Impedance measure
Dimensions
