Speaker Beyma 6NMFW, 8 ohm, 6.5 inch
|
Beyma |
6NMFW |
6NMFW-8 |
206NMFW8 |
Cone driver |
|
|
Brand Beyma |
Model 6NMFW |
TLHP code 6NMFW-8 |
Manufacturer code 206NMFW8 |
|
|
Product type Cone driver |
|
|||
Unavailable
General |
|
| Product type | Cone driver |
| Brand | Beyma |
| Reference | 6NMFW |
| Product code | 206NMFW8 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 7 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 87 dB |
| Calculated sensitivity | 84.88 dB |
| Nominal power handling | 200 W |
| Max power handling | 400 W |
| Bandwidth | 35÷3000 Hz |
Fundamental parameters |
|
| Sd | 154 cm² |
| Mms | 45 gr |
| Cms | 342 µm/N |
| Rms | 1.52 kg/s |
| Le | 0.95 mH |
| Re | 5.8 ohm |
| BL | 14 T.m |
Small signal parameters |
|
| Fs | 40 Hz |
| Qes | 0.35 |
| Qms | 7.5 |
| Qts | 0.34 |
| Vas | 11 L |
Datas |
|
| Xmax | ±9 mm |
| Calculated Xmax | ±9 mm |
| Xvar, Xmech, Xlim | ±21.5 mm |
| EBP | 114 Hz |
| Zmin | 7.6 ohm |
| Fs / Qts | 118 Hz |
| Vas * Qts² | 1.28 L |
| Efficiency | 0.21 % |
| Calculated efficiency | 0.2 % |
| Weight | ~3.5 kg |
| Demodulation ring | Yes |
Dimensions |
|
| Voice coil diameter | 2 inch |
| Winding depth | 20 mm |
| Gap height | 6 mm |
| External dimensions | 176 | 176 mm |
| Baffle cutout diameter | 157.6 mm |
| Depth | 120.5 mm |
| Depth after front | 109 mm |
| Diamètre aimant (mm) | 134 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Winding material | Aluminium |
| Surround shape | One roll |
| Surround material | nitrile butadiene rubber |
| Dome material | Kevlar fibers |
Question about Beyma 6NMFW-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Beyma 6NMFW-8
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Beyma 6NMFW-8
SPL vs Impedance measure
Dimensions
