Celestion |
FTR12-4080HDX |
FTR12-4080HDX-8 |
T5607 |
Cone driver |
|
Brand Celestion |
Model FTR12-4080HDX |
TLHP code FTR12-4080HDX-8 |
Manufacturer code T5607 |
|
Product type Cone driver |
|
12" ferrite subwoofer offers 1000Wrms (AES) continuous power handling and a frequency response of 47Hz-3kHz
4" high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
Double suspension and a “multi-roll" surround provide exceptional linearity at extremes of cone excursion
Intelligent heat management in both chassis and magnet assembly design further minimizes distortion
Designed for high-end sound reinforcement applications, Celestion FTR aluminium chassis, Ferrite magnet drivers feature a Smart Chassis Design and wet wound Inside/Outside Voice Coils for efficient cooling, reducing thermal compensation and minimising distortion. Exceptional BL and stiffness (K) symmetry further contribute to low distortion, while FEA-optimised magnet topology reduces inductance, also minimising distortion.
The FTRs use water-resistant, glass fibre impregnated cones with sealed surrounds and added damping for reduced cone resonances. FTR-HDX drivers are among the lightest in their class.
General |
|
Product type | Cone driver |
Brand | Celestion |
Reference | FTR12-4080HDX |
Product code | T5607 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 12.5 inch |
Frequency coverage type | Midbass, Midrange |
Country Origin | CN |
Manufacturer sensitivity | 93 dB |
Calculated sensitivity | 92.9 dB |
Nominal power handling | 1000 W |
Bandwidth | 47÷3000 Hz |
Fundamental parameters |
|
Mms | 108.68 gr |
Le | 1.92 mH |
Re | 6.05 ohm |
Small signal parameters |
|
Fs | 61.2 Hz |
Qes | 0.446 |
Qms | 2.228 |
Qts | 0.372 |
Vas | 24.79 L |
Datas |
|
Xmax | ±8 mm |
EBP | 137 Hz |
Fs / Qts | 165 Hz |
Vas * Qts² | 3.44 L |
Calculated efficiency | 1.23 % |
Weight | ~10.9 kg |
Dimensions |
|
Voice coil diameter | 4 inch |
Outside diameter | 313 mm |
Baffle cutout diameter | 282 mm |
Depth after front | 158 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
* Measured - 1W @ 1m