Celestion |
FTR15-3070E |
FTR15-3070E-8 |
T5499 |
Cone driver |
|
Brand Celestion |
Model FTR15-3070E |
TLHP code FTR15-3070E-8 |
Manufacturer code T5499 |
|
Product type Cone driver |
|
400Wrms continuous power handling (measured to AES Standard)
Flexirol™ technology for greater excursion control
Saturated gap technology for lower harmonic distortion
Low frequency response, down to 40Hz
Smart chassis design minimises acoustic distortion
Specially treated weather-resistant cone
Designed for high-end sound reinforcement applications, Celestion FTR aluminium chassis, Ferrite magnet drivers feature a Smart Chassis Design and wet wound Inside/Outside Voice Coils for efficient cooling, reducing thermal compensation and minimising distortion. Exceptional BL and stiffness (K) symmetry further contribute to low distortion, while FEA-optimised magnet topology reduces inductance, also minimising distortion.
The FTRs use water-resistant, glass fibre impregnated cones with sealed surrounds and added damping for reduced cone resonances. FTR-HDX drivers are among the lightest in their class.
General |
|
Product type | Cone driver |
Brand | Celestion |
Reference | FTR15-3070E |
Product code | T5499 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 15 inch |
Frequency coverage type | Sub, Low, Midbass |
Country Origin | CN |
Manufacturer sensitivity | 97 dB |
Calculated sensitivity | 96.48 dB |
Nominal power handling | 400 W |
Bandwidth | 40÷4000 Hz |
Fundamental parameters |
|
Mms | 88.69 gr |
Le | 1.3 mH |
Re | 5.36 ohm |
Small signal parameters |
|
Fs | 45.3 Hz |
Qes | 0.46 |
Qms | 3.07 |
Qts | 0.4 |
Vas | 143.85 L |
Datas |
|
Xmax | ±5.5 mm |
EBP | 98 Hz |
Fs / Qts | 113 Hz |
Vas * Qts² | 23.02 L |
Calculated efficiency | 2.8 % |
Weight | ~8.4 kg |
Dimensions |
|
Voice coil diameter | 3 inch |
Outside diameter | 385 mm |
Baffle cutout diameter | 351 mm |
Depth after front | 161 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
|
* Measured - 1W @ 1m