Speaker Celestion TF1015, 8 ohm, 10 inch
|
Celestion |
TF1015 |
TF1015-8 |
Cone driver |
|
|
Brand Celestion |
Model TF1015 |
TLHP code TF1015-8 |
|
|
Product type Cone driver |
|
||
Unavailable
-
10" driver providing 95dB sensitivity and 70Wrms (AES standard) power handling
1.5" high temperature copper voice coil wound on polyimide former for increased reliability
Rigid chasis design for maximum energy transfer
Vented magnet assembly for enhanced cooling
Excellent bass and mid-range performance
General |
|
| Product type | Cone driver |
| Brand | Celestion |
| Reference | TF1015 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 10 inch |
| Frequency coverage type | Midbass, Midrange |
| Country Origin | CN |
| Manufacturer sensitivity | 95 dB |
| Calculated sensitivity | 91.32 dB |
| Nominal power handling | 70 W |
| Bandwidth | 80÷6000 Hz |
Fundamental parameters |
|
| Mms | 28.07 gr |
| Le | 0.59 mH |
| Re | 5.66 ohm |
Small signal parameters |
|
| Fs | 85.4 Hz |
| Qes | 1.477 |
| Qms | 3.624 |
| Qts | 1.049 |
| Vas | 21.02 L |
Datas |
|
| Xmax | ±2 mm |
| EBP | 58 Hz |
| Fs / Qts | 81 Hz |
| Vas * Qts² | 23.14 L |
| Calculated efficiency | 0.86 % |
| Weight | ~2 kg |
Dimensions |
|
| Voice coil diameter | 1.5 inch |
| Outside diameter | 256 mm |
| Baffle cutout diameter | 229 mm |
| Depth after front | 100 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Celestion TF1015-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Celestion TF1015-8
10" driver providing 95dB sensitivity and 70Wrms (AES standard) power handling
1.5" high temperature copper voice coil wound on polyimide former for increased reliability
Rigid chasis design for maximum energy transfer
Vented magnet assembly for enhanced cooling
Excellent bass and mid-range performance
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
1.5" high temperature copper voice coil wound on polyimide former for increased reliability
Rigid chasis design for maximum energy transfer
Vented magnet assembly for enhanced cooling
Excellent bass and mid-range performance
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Celestion TF1015-8
SPL vs Impedance measure *
* Tested for two hours using a continuous
