Speaker Celestion TF1218, 8 ohm, 12 inch
|
Celestion |
TF1218 |
TF1218-8 |
T5279 |
Cone driver |
|
|
Brand Celestion |
Model TF1218 |
TLHP code TF1218-8 |
Manufacturer code T5279 |
|
|
Product type Cone driver |
|
|||
Unavailable
-
12" Bass and mid-range driver offering a superior price/performance ratio
Provides 97dB sensitivity and 100Wrms (AES standard) power handling
1.75" High temperature copper voice coil wound on polyimide for increased reliability
Kevlar-loaded cone with sealed surround and damping for reduced distortion
Suitable for use in 2-way systems
General |
|
| Product type | Cone driver |
| Brand | Celestion |
| Reference | TF1218 |
| Product code | T5279 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 12 inch |
| Frequency coverage type | Midbass, Midrange |
| Country Origin | CN |
| Manufacturer sensitivity | 97 dB |
| Calculated sensitivity | 95.28 dB |
| Nominal power handling | 100 W |
| Bandwidth | 60÷4500 Hz |
Fundamental parameters |
|
| Mms | 39.41 gr |
| Le | 0.57 mH |
| Re | 5.55 ohm |
Small signal parameters |
|
| Fs | 62 Hz |
| Qes | 0.72 |
| Qms | 4.9 |
| Qts | 0.63 |
| Vas | 66.6 L |
Datas |
|
| Xmax | ±2 mm |
| EBP | 86 Hz |
| Fs / Qts | 98 Hz |
| Vas * Qts² | 26.44 L |
| Calculated efficiency | 2.12 % |
| Weight | ~3.3 kg |
Dimensions |
|
| Voice coil diameter | 1.75 inch |
| Outside diameter | 309 mm |
| Baffle cutout diameter | 283 mm |
| Depth after front | 125 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Celestion TF1218-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Celestion TF1218-8, Range, version, replacement...
Informations Celestion TF1218-8
12" Bass and mid-range driver offering a superior price/performance ratio
Provides 97dB sensitivity and 100Wrms (AES standard) power handling
1.75" High temperature copper voice coil wound on polyimide for increased reliability
Kevlar-loaded cone with sealed surround and damping for reduced distortion
Suitable for use in 2-way systems
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Provides 97dB sensitivity and 100Wrms (AES standard) power handling
1.75" High temperature copper voice coil wound on polyimide for increased reliability
Kevlar-loaded cone with sealed surround and damping for reduced distortion
Suitable for use in 2-way systems
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Celestion TF1218-8
SPL vs Impedance measure *
* Tested for two hours using a continuous
