Speaker Celestion TF1520, 8 ohm, 15 inch
|
Celestion |
TF1520 |
TF1520-8 |
T5467 |
Cone driver |
|
|
Brand Celestion |
Model TF1520 |
TLHP code TF1520-8 |
Manufacturer code T5467 |
|
|
Product type Cone driver |
|
|||
Unavailable
-
Versatile 15" bass and mid-range driver providing 96dB sensitivity and 150Wrms (AES standard) power handling
2" high temperature copper voice coil wound on polyimide for increased reliability
Ideal for 2-way and 3-way systems
Kevlar-loaded cone with sealed surround and damping for reduced distortion
Rigid chassis design for maximum energy transfer
Vented magnet assembly for enhanced cooling
General |
|
| Product type | Cone driver |
| Brand | Celestion |
| Reference | TF1520 |
| Product code | T5467 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 15 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Country Origin | CN |
| Manufacturer sensitivity | 96 dB |
| Calculated sensitivity | 95.93 dB |
| Nominal power handling | 150 W |
| Bandwidth | 45÷4000 Hz |
Fundamental parameters |
|
| Mms | 62.33 gr |
| Le | 1.41 mH |
| Re | 5.95 ohm |
Small signal parameters |
|
| Fs | 51.7 Hz |
| Qes | 0.85 |
| Qms | 6.69 |
| Qts | 0.75 |
| Vas | 157.69 L |
Datas |
|
| Xmax | ±3 mm |
| EBP | 61 Hz |
| Fs / Qts | 69 Hz |
| Vas * Qts² | 88.71 L |
| Calculated efficiency | 2.47 % |
| Weight | ~5 kg |
Dimensions |
|
| Voice coil diameter | 2 inch |
| Outside diameter | 385 mm |
| Baffle cutout diameter | 352 mm |
| Depth after front | 158 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Celestion TF1520-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Celestion TF1520-8
Versatile 15" bass and mid-range driver providing 96dB sensitivity and 150Wrms (AES standard) power handling
2" high temperature copper voice coil wound on polyimide for increased reliability
Ideal for 2-way and 3-way systems
Kevlar-loaded cone with sealed surround and damping for reduced distortion
Rigid chassis design for maximum energy transfer
Vented magnet assembly for enhanced cooling
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
2" high temperature copper voice coil wound on polyimide for increased reliability
Ideal for 2-way and 3-way systems
Kevlar-loaded cone with sealed surround and damping for reduced distortion
Rigid chassis design for maximum energy transfer
Vented magnet assembly for enhanced cooling
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Celestion TF1520-8
SPL vs Impedance measure *
* Tested for two hours using a continuous
