Celestion |
TN1530 |
TN1530-8 |
Cone driver |
|
Brand Celestion |
Model TN1530 |
TLHP code TN1530-8 |
|
Product type Cone driver |
|
15" Bass and mid-range driver offering 98dB sensitivity and 300Wrms (AES standard) power handling
3" high-temperature copper voice coil wound on polyimide for increased reliability
FEA optimised compact and lightweight neodymium magnet assembly
"M-Roll" surround provides progressive excursion control yielding a smooth response at extremes of frequency range
Smart use of venting and specially designed heatsink for reduced thermal compression
Effective flux management enables increased sensitivity
General |
|
Product type | Cone driver |
Brand | Celestion |
Reference | TN1530 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 15 inch |
Frequency coverage type | Sub, Low, Midbass |
Country Origin | CN |
Manufacturer sensitivity | 98 dB |
Calculated sensitivity | 96.37 dB |
Nominal power handling | 300 W |
Bandwidth | 40÷3000 Hz |
Fundamental parameters |
|
Mms | 99 gr |
Le | 1.03 mH |
Re | 5.18 ohm |
Small signal parameters |
|
Fs | 47.6 Hz |
Qes | 0.445 |
Qms | 3.147 |
Qts | 0.39 |
Vas | 117.02 L |
Datas |
|
Xmax | ±3.75 mm |
EBP | 107 Hz |
Fs / Qts | 122 Hz |
Vas * Qts² | 17.8 L |
Calculated efficiency | 2.73 % |
Weight | ~2.8 kg |
Dimensions |
|
Voice coil diameter | 3 inch |
Outside diameter | 385 mm |
Baffle cutout diameter | 352 mm |
Depth after front | 160 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
* Tested for two hours using a continuous