Speaker Oberton 18XB1500, 8 ohm, 18 inch
|
Oberton |
18XB1500 |
18XB1500-8 |
11118F0208 KTL Magnet + system Silver frame |
Cone driver |
|
|
Brand Oberton |
Model 18XB1500 |
TLHP code 18XB1500-8 |
Manufacturer code 11118F0208 KTL Magnet + system Silver frame |
|
|
Product type Cone driver |
|
|||
-
The 18XB1500 ferrite bass loudspeaker is specially designed for horn application to deliver very high impact bass response, with exceptional high power capacity.
It incorporates an 4.5" sandwich voice coil, double silicone spider assembly, paper cone with carbon fibers and die cast vented aluminium frame. Powerful, vented magnetic structure with double demodulating rings reduced power compression. The result is high efficient transducer for bass horn applications, with the ability to handle high excursion with low distortion and reduced thermal power compression.
Application : Power bass
KEY FEATURES :
115 mm (4.5") high temperature sandwich voice coil
3000 W AES program power
Powerful, vented 245 mm magnet structure
Double aluminium demodulating ring for lower distortion and improved heat dissipation
Double silicone spider assembly for improved excursion control and linearity
Water protected cone with carbon fibers
General |
|
| Product type | Cone driver |
| Brand | Oberton |
| Reference | 18XB1500 |
| Product code | 11118F0208 KTL Magnet + system Silver frame |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 18 inch |
| Frequency coverage type | Sub, Low |
| Calculated sensitivity | 97.71 dB |
| Nominal power handling | 1500 W |
| Bandwidth | 30÷1000 Hz |
Fundamental parameters |
|
| Mms | 212 gr |
| Le | 1.53 mH |
| Re | 5.28 ohm |
Small signal parameters |
|
| Fs | 35.8 Hz |
| Qes | 0.229 |
| Qms | 10.52 |
| Qts | 0.225 |
| Vas | 192.5 L |
Datas |
|
| Xmax | ±11 mm |
| EBP | 156 Hz |
| Fs / Qts | 159 Hz |
| Vas * Qts² | 9.75 L |
| Calculated efficiency | 3.71 % |
Dimensions |
|
| Voice coil diameter | 4.5 inch |
| Outside diameter | 461 mm |
| Baffle cutout diameter | 417 mm |
| Front thickness | 18 mm |
| Depth after front | 190.5 mm |
| Diamètre aimant (mm) | 245 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Oberton 18XB1500-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Repair Oberton 18XB1500-8
With Oberton 18XB1500-8, customers has also bought
Informations Oberton 18XB1500-8
It incorporates an 4.5" sandwich voice coil, double silicone spider assembly, paper cone with carbon fibers and die cast vented aluminium frame. Powerful, vented magnetic structure with double demodulating rings reduced power compression. The result is high efficient transducer for bass horn applications, with the ability to handle high excursion with low distortion and reduced thermal power compression.
Application : Power bass
KEY FEATURES :
115 mm (4.5") high temperature sandwich voice coil
3000 W AES program power
Powerful, vented 245 mm magnet structure
Double aluminium demodulating ring for lower distortion and improved heat dissipation
Double silicone spider assembly for improved excursion control and linearity
Water protected cone with carbon fibers
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Dimensions
