Speaker PHL Audio 2440, 8 ohm, 8 inch
|
PHL Audio |
2440 |
2440-8 |
Cone driver |
|
|
Brand PHL Audio |
Model 2440 |
TLHP code 2440-8 |
|
|
Product type Cone driver |
|
||
Unavailable
-
Low midrange transducer dedicated to the reproduction of 80-4000Hz frequencies. The bass midrange version of the 2400. Usable either for direct radiation or for horn loaded application. Its design gives priority to precision in the midrange band.
General |
|
| Product type | Cone driver |
| Brand | PHL Audio |
| Reference | 2440 |
Informations |
|
| Product manufacturer range | Non Standard |
| Nominal impedance | 8 ohm |
| Frequency coverage type | Midbass, Midrange, High midrange |
| Manufacturer sensitivity | 96 dB |
| Calculated sensitivity | 95.19 dB |
| Nominal power handling | 200 W |
| Bandwidth | 80÷4000 Hz |
Fundamental parameters |
|
| Mms | 20 gr |
| Le | 0.75 mH |
| Re | 5.2 ohm |
Small signal parameters |
|
| Fs | 81 Hz |
| Qes | 0.32 |
| Qms | 4.1 |
| Qts | 0.3 |
| Vas | 13 L |
Datas |
|
| EBP | 253 Hz |
| Fs / Qts | 270 Hz |
| Vas * Qts² | 1.17 L |
| Calculated efficiency | 2.08 % |
Shape & Materials |
|
| Magnet type | Ferrite |
Question about PHL Audio 2440-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
PHL Audio 2440-8, Range, version, replacement...
Informations PHL Audio 2440-8
Low midrange transducer dedicated to the reproduction of 80-4000Hz frequencies. The bass midrange version of the 2400. Usable either for direct radiation or for horn loaded application. Its design gives priority to precision in the midrange band.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
