Speaker PHL Audio 3002, 8 ohm, 10 inch
|
PHL Audio |
3002 |
3002-8 |
Cone driver |
|
|
Brand PHL Audio |
Model 3002 |
TLHP code 3002-8 |
|
|
Product type Cone driver |
|
||
Unavailable
General |
|
| Product type | Cone driver |
| Brand | PHL Audio |
| Reference | 3002 |
Informations |
|
| Product manufacturer range | Non Standard |
| Nominal impedance | 8 ohm |
| Dimensional category | 10 inch, 11 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 91 dB |
| Calculated sensitivity | 90.81 dB |
| Nominal power handling | 200 W |
| Bandwidth | 40÷2500 Hz |
Fundamental parameters |
|
| Mms | 65 gr |
| Le | 0.961 mH |
| Re | 5.4 ohm |
| BL | 15.9 T.m |
Small signal parameters |
|
| Fs | 47 Hz |
| Qes | 0.41 |
| Qms | 6.42 |
| Qts | 0.39 |
| Vas | 31.1 L |
Datas |
|
| Xmax | ±4.5 mm |
| Calculated Xmax | ±5.1667 mm |
| EBP | 115 Hz |
| Zmin | 5.7 ohm |
| Fs / Qts | 121 Hz |
| Vas * Qts² | 4.74 L |
| Efficiency | 0.8 % |
| Calculated efficiency | 0.76 % |
| Weight | ~11 kg |
| Recommended load volume | 20 L |
| Fréquence d'accord liée à la charge | 65 Hz |
Dimensions |
|
| Voice coil diameter | 2 inch |
| Winding depth | 13 mm |
| Gap height | 8 mm |
| External dimensions | 254.5 | 283.5 mm |
| Baffle cutout diameter | 228 mm |
| Front thickness | 11 mm |
| Depth after front | 109 mm |
| Diamètre aimant (mm) | 158 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Surround material | Cloth |
Question about PHL Audio 3002-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations PHL Audio 3002-8
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Dimensions
