Speaker PHL Audio 4050, 8 ohm, 12 inch
|
PHL Audio |
4050 |
4050-8 |
Cone driver |
|
|
Brand PHL Audio |
Model 4050 |
TLHP code 4050-8 |
|
|
Product type Cone driver |
|
||
Unavailable
-
High SPL - High quality sounding low-midrange driver - Sensitivity
optimized over bass extension
General |
|
| Product type | Cone driver |
| Brand | PHL Audio |
| Reference | 4050 |
Informations |
|
| Product manufacturer range | Non Standard |
| Nominal impedance | 8 ohm |
| Dimensional category | 12 inch, 13 inch |
| Frequency coverage type | Low, Midbass, Midrange |
| Manufacturer sensitivity | 99 dB |
| Calculated sensitivity | 98.57 dB |
| Nominal power handling | 350 W |
| Bandwidth | 60÷3000 Hz |
Fundamental parameters |
|
| Mms | 51 gr |
| Le | 1.12 mH |
| Re | 5.8 ohm |
Small signal parameters |
|
| Fs | 49 Hz |
| Qes | 0.21 |
| Qms | 3.3 |
| Qts | 0.2 |
| Vas | 84 L |
Datas |
|
| Xmax | ±4.5 mm |
| EBP | 233 Hz |
| Fs / Qts | 245 Hz |
| Vas * Qts² | 3.36 L |
| Calculated efficiency | 4.52 % |
| Weight | ~9.6 kg |
Dimensions |
|
| Voice coil diameter | 3 inch |
| External dimensions | 307 | 326.5 mm |
| Baffle cutout diameter | 281.5 mm |
| Front thickness | 13 mm |
| Depth after front | 128.5 mm |
| Diamètre aimant (mm) | 204 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
Question about PHL Audio 4050-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations PHL Audio 4050-8
High SPL - High quality sounding low-midrange driver - Sensitivity
optimized over bass extension
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
optimized over bass extension
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
