Speaker PHL Audio 4580, 8 ohm, 12 inch
|
PHL Audio |
4580 |
4580-8 |
Cone driver |
|
|
Brand PHL Audio |
Model 4580 |
TLHP code 4580-8 |
|
|
Product type Cone driver |
|
||
Unavailable
-
Natural convection Intercooling System
Front side coated curvilinear cone designed for 2 way systems operation
High compliance double half-roll fabric surround
General |
|
| Product type | Cone driver |
| Brand | PHL Audio |
| Reference | 4580 |
Informations |
|
| Product manufacturer range | Non Standard |
| Nominal impedance | 8 ohm |
| Dimensional category | 12 inch, 13 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 96 dB |
| Calculated sensitivity | 95.84 dB |
| Nominal power handling | 300 W |
| Bandwidth | 40÷3000 Hz |
Fundamental parameters |
|
| Sd | 539 cm² |
| Mms | 52 gr |
| Cms | 260 µm/N |
| Le | 0.911 mH |
| Re | 5.3 ohm |
| BL | 14.8 T.m |
Small signal parameters |
|
| Fs | 43 Hz |
| Qes | 0.34 |
| Qms | 3.12 |
| Qts | 0.31 |
| Vas | 107.2 L |
Datas |
|
| Xmax | ±5.5 mm |
| Calculated Xmax | ±6.1667 mm |
| EBP | 126 Hz |
| Zmin | 5.9 ohm |
| Fs / Qts | 139 Hz |
| Vas * Qts² | 10.31 L |
| Efficiency | 2.4 % |
| Calculated efficiency | 2.41 % |
| Weight | ~6.4 kg |
Dimensions |
|
| Voice coil diameter | 2.5 inch |
| Winding depth | 15 mm |
| Gap height | 8 mm |
| External dimensions | 307 | 326.5 mm |
| Baffle cutout diameter | 282 mm |
| Front thickness | 12.8 mm |
| Depth after front | 124.5 mm |
| Diamètre aimant (mm) | 172.4 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Surround material | Cloth |
Question about PHL Audio 4580-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations PHL Audio 4580-8
Natural convection Intercooling System
Front side coated curvilinear cone designed for 2 way systems operation
High compliance double half-roll fabric surround
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Front side coated curvilinear cone designed for 2 way systems operation
High compliance double half-roll fabric surround
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Dimensions
