Speaker RCF LF15X400, 8 ohm, 15 inch
|
RCF |
LF15X400 |
LF15X400-8 |
11160001 |
Cone driver |
|
|
Brand RCF |
Model LF15X400 |
TLHP code LF15X400-8 |
Manufacturer code 11160001 |
|
|
Product type Cone driver |
|
|||
-
Incredibly linear frequency response characteristics, extreme high power handling while generating the lowest harmonic distortion of any comparable 15-inch transducer within its application range.
Features :
4-inch Inside/outside copper voice coil
1600 Watt continuous program power handling
97 dB Sensitivity
30 Hz - 1.5 kHz Frequency range
Progressive, spaced, aluminum demodulation rings
Forced air ventilation and 14 mm top plate for minimum power compression
Dual spider design with silicon based dampening control
Triple-roll surround and corrugated straight cone geometry
The LF15X400 uses a fibre loaded cone assembly along with a high excursion triple roll surround. This combination provides remarkable strength and a peak to peak maximum excursion of 52 mm. The T-pole also features RCF Precision's spaced gap demodulation technology, progressively braking the voice coil, providing a much smoother transition for the moving mass as it reaches its maximum excursion limits. Forced air venting system.
Applications :
The LF15X400 is ideal for use in applications whereincredible power handling, long excursion and perfect control is required. Ideal for high quality professional bass reflex and bass-horn systems, incredible when used in double 15" subwoofer configuration.
The transducer's low frequency extension, coupled with its extremely low generation of harmonic distortion, also makes it ideal for use within critical listening applications such as studio monitoring subwoofer systems.
General |
|
| Product type | Cone driver |
| Brand | RCF |
| Reference | LF15X400 |
| Product code | 11160001 |
Datas |
|
| Weight | ~13.6 kg |
Question about RCF LF15X400-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations RCF LF15X400-8
Features :
4-inch Inside/outside copper voice coil
1600 Watt continuous program power handling
97 dB Sensitivity
30 Hz - 1.5 kHz Frequency range
Progressive, spaced, aluminum demodulation rings
Forced air ventilation and 14 mm top plate for minimum power compression
Dual spider design with silicon based dampening control
Triple-roll surround and corrugated straight cone geometry
The LF15X400 uses a fibre loaded cone assembly along with a high excursion triple roll surround. This combination provides remarkable strength and a peak to peak maximum excursion of 52 mm. The T-pole also features RCF Precision's spaced gap demodulation technology, progressively braking the voice coil, providing a much smoother transition for the moving mass as it reaches its maximum excursion limits. Forced air venting system.
Applications :
The LF15X400 is ideal for use in applications whereincredible power handling, long excursion and perfect control is required. Ideal for high quality professional bass reflex and bass-horn systems, incredible when used in double 15" subwoofer configuration.
The transducer's low frequency extension, coupled with its extremely low generation of harmonic distortion, also makes it ideal for use within critical listening applications such as studio monitoring subwoofer systems.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes RCF LF15X400-8
SPL measure *
* Frequency response curve of the loudspeaker taken in a hemispherical
Impedance measure
Dimensions
