Speaker Sica 8E12CS, 8 ohm, 8 inch
|
Sica |
8E12CS |
8E12CS-8 |
Z005161C |
Cone driver |
|
|
Brand Sica |
Model 8E12CS |
TLHP code 8E12CS-8 |
Manufacturer code Z005161C |
|
|
Product type Cone driver |
|
|||
Unavailable
General |
|
| Product type | Cone driver |
| Brand | Sica |
| Reference | 8E12CS |
| Product code | Z005161C |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 8.5 inch |
| Manufacturer sensitivity | 95.4 dB |
| Calculated sensitivity | 94.23 dB |
| Nominal power handling | 150 W |
| Max power handling | 300 W |
Fundamental parameters |
|
| Sd | 213.8 cm² |
| Mms | 20.5 gr |
| Cms | 215 µm/N |
| Le | 0.82 mH |
| Re | 3 ohm |
| BL | 13.33 T.m |
Small signal parameters |
|
| Fs | 75.8 Hz |
| Qes | 0.35 |
| Qms | 3.6 |
| Qts | 0.32 |
| Vas | 13.9 L |
Datas |
|
| Flux density | 1.1 T |
| Xmax | ±2 mm |
| EBP | 217 Hz |
| Fs / Qts | 237 Hz |
| Vas * Qts² | 1.43 L |
| Efficiency | 1.57 % |
| Calculated efficiency | 1.67 % |
| Weight | ~3.6 kg |
Dimensions |
|
| Voice coil diameter | 2 inch |
| Outside diameter | 210 mm |
| Baffle cutout diameter | 179.5 mm |
| Depth | 96 mm |
| Front thickness | 8.5 mm |
| Depth after front | 87.5 mm |
| Diamètre aimant (mm) | 134 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Acier |
| Winding material | Copper |
| Voice coil former | Kapton |
| Surround shape | Double roll |
| Surround material | Cloth |
| Dome material | Paper |
Question about Sica 8E12CS-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Sica 8E12CS-8, Range, version, replacement...
Informations Sica 8E12CS-8
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
