Speaker Tang Band W3-1876S, 4 ohm, 93.1 mm front plate

Brand 
TangBand
Model 
W3-1876S
SKU 
W3-1876S-4
Product type 
Cone driver
Brand
TangBand
Model
W3-1876S
TLHP code
W3-1876S-4
Product type 
Cone driver

Unavailable

General

Product type Cone driver
Brand TangBand
Reference W3-1876S

Informations

Nominal impedance 4 ohm
Dimensional category 3.5 inch
Frequency coverage type Low, Midbass, Midrange
Manufacturer sensitivity 76 dB
Calculated sensitivity 76.51 dB
Nominal power handling 15 W
Max power handling 30 W
Bandwidth 55÷2000 Hz

Fundamental parameters

Sd 27 cm²
Mms 9.98 gr
Re 3.6 ohm
BL 5.28 T.m

Small signal parameters

Fs 55 Hz
Qes 0.5
Qms 3.17
Qts 0.43
Vas 0.88 L

Datas

Xmax ±5 mm
EBP 110 Hz
Fs / Qts 128 Hz
Vas * Qts² 0.17 L
Calculated efficiency 0.03 %

Dimensions

Voice coil diameter 0.8 inch
Gap height 4 mm
Outside diameter 93.1 mm
Baffle cutout diameter 74.5 mm
Depth 65.8 mm
Front thickness 8.6 mm
Depth after front 57.2 mm
Diamètre aimant (mm) 30 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Surround shape One roll
Surround material Santoprene
Cone material Polypropylen


Question about TangBand W3-1876S-4

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


Informations TangBand W3-1876S-4


All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes TangBand W3-1876S-4

SPL vs Impedance measure

Image spl vs impedance measure cone driver TangBand Speaker Tang Band W3-1876S, 4 ohm, 93.1 mm front plate

Dimensions

Image Drawing & Mounting cone driver TangBand Speaker Tang Band W3-1876S, 4 ohm, 93.1 mm front plate
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x