SEAS |
L16RNX3 |
L16RNX3-8 |
H1869-08 |
Cone driver |
Sold by pair |
|
Brand SEAS |
Model L16RNX3 |
TLHP code L16RNX3-8 |
Manufacturer code H1869-08 |
||
Product type Cone driver |
Sales packaging Sold by Pair |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 5 weeks
L16RNX3 is a High Fidelity woofer with an injection moulded metal chassis, intended for bass reflex and closed box designs.
Optimized cone design combined with the stiff and light weight aluminium gives a high break-up point to allow for easier crossover design and wider bandwith than common aluminium cones.
Titanium voice coil former with a very long copper coil winding and a bumped back-plate for excellent force transfer, transient sound reproduction and large linear excursion.
A heavy copper ring below the T-shaped pole piece reduces non linear and modulation distortion.
Extremely stiff and stable injection moulded metal basket, keeps the critical components in perfect alignment. Large windows in the basket both above and below the spider reduce sound reflection, air flow noise and cavity resonance to a minimum.
General |
|
Product type | Cone driver |
Brand | SEAS |
Reference | L16RNX3 |
Product code | H1869-08 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 6 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 84 dB |
Calculated sensitivity | 84.11 dB |
Nominal power handling | 200 W |
Max power handling | 300 W |
Bandwidth | 20÷3000 Hz |
Fundamental parameters |
|
Sd | 104 cm² |
Mms | 20.8 gr |
Cms | 1200 µm/N |
Rms | 0.76 kg/s |
Le | 0.6 mH |
Re | 6.4 ohm |
BL | 8.7 T.m |
Small signal parameters |
|
Fs | 32 Hz |
Qes | 0.35 |
Qms | 5.48 |
Qts | 0.33 |
Vas | 18 L |
Datas |
|
Flux density | 1.1 T |
Xmax | ±7 mm |
Calculated Xmax | ±9 mm |
Xvar, Xmech, Xlim | ±11 mm |
EBP | 91 Hz |
Fs / Qts | 97 Hz |
Vas * Qts² | 1.97 L |
Calculated efficiency | 0.17 % |
Weight | ~1.8 kg |
Dimensions |
|
Voice coil diameter | 1.54 inch |
Winding depth | 20 mm |
Gap height | 6 mm |
Outside diameter | 146 mm |
Baffle cutout diameter | 126 mm |
Depth | 75.5 mm |
Front thickness | 5 mm |
Depth after front | 70.5 mm |
Diamètre aimant (mm) | 110 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Acier |
Winding material | Copper |
Voice coil former | Titanium |
Surround shape | One roll |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
From SEAS
From other manufacturer
* The frequency responses above show measured free field sound pressure in 0
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.