PHL Audio |
2534NdM |
2534NDM-TLHP-8 |
Cone driver |
Sold by piece |
|
Brand PHL Audio |
Model 2534NdM |
TLHP code 2534NDM-TLHP-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 14 weeks
8-inch coaxial midrange speaker for demanding home systems, ideal in 3-way combination cut at 200 Hz minimum and loaded in a few well-damped closed liters.
The basic idea of the 2534NdM is a coaxial 2520 with a neodymium magnetic system (to reduce weight) and a 16 ohm impedance coil to reduce the difference in sensitivity with the bass channel (in 12 or 15 inches). The cone is made of paper treated with an exponential profile, the suspension is flat and made of foam (it's a foam that doesn't go limp after a few years!), the neodymium magnetic system with natural cooling is very flat, this allows a reduction in the natural phase shift with the compression associated with it. The 2534NdM does not have the most linear frequency response of 8-inch coaxials, but listening to it makes everyone agree! It offers a clear and powerful response with a low level of distortion. It is necessary to filter the 2534NdM perfectly in order to get the best out of it, in passive mode a cell with the correct impedance is essential. Combined with the 5510MNdS for the bass and the Kartesian Cmp45_vTLHP compression for the treble, it will bring you a lot of listening pleasure in a system for large rooms and outdoors.
General |
|
Product type | Cone driver |
Brand | PHL Audio |
Reference | 2534NdM |
Informations |
|
Product manufacturer range | Non Standard |
Nominal impedance | 16 ohm |
Dimensional category | 8 inch, 9 inch |
Frequency coverage type | Fullrange |
Manufacturer sensitivity | 95.5 dB |
Calculated sensitivity | 95.52 dB |
Nominal power handling | 200 W |
Bandwidth | 200÷5000 Hz |
Recommended min cutoff frequency | 200 Hz |
Fundamental parameters |
|
Sd | 220 cm² |
Mms | 18.5 gr |
Cms | 90 µm/N |
Le | 1.76 mH |
Re | 12.5 ohm |
BL | 19 T.m |
Small signal parameters |
|
Fs | 127 Hz |
Qes | 0.51 |
Qms | 5.46 |
Qts | 0.47 |
Vas | 5.8 L |
Datas |
|
Xmax | ±2 mm |
Calculated Xmax | ±4.1667 mm |
EBP | 249 Hz |
Zmin | 14.6 ohm |
Fs / Qts | 270 Hz |
Vas * Qts² | 1.29 L |
Efficiency | 2.3 % |
Calculated efficiency | 2.24 % |
Weight | ~2.2 kg |
Dimensions |
|
Voice coil diameter | 2 inch |
Winding depth | 11 mm |
Gap height | 8 mm |
External dimensions | 205 | 234 mm |
Baffle cutout diameter | 185 mm |
Depth | 93.5 mm |
Front thickness | 9.5 mm |
Depth after front | 84 mm |
Diamètre aimant (mm) | 97 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Neodymium |
Basket masterial | Magnesium |
Winding material | CCAR (Flat ribbon copper-clad aluminium wire) |
Surround shape | Flat |
Surround material | Foam |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.