Peerless |
NCP-1540R01-08 |
Cone driver |
|
Brand Peerless |
TLHP code NCP-1540R01-08 |
|
Product type Cone driver |
|
This 15 inch 8 ohm speaker features a FEA optimized Neo magnet motor, a 4in high-temperature CCAW voice coil, and a high strength cast aluminum frame, specially designed motor cooling system incorporate with the cast aluminum heatsink can dramatically increase the power handling and reduce the power compression, the multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
NOTE THIS DRIVER IS NOT APPROVED AND/OR IS NOT IN MASS PRODUCTION YET. AS SUCH IT MAY BE SUBJECT TO CHANGE. SPEC IS ONLY FOR INFORMATION. PLEASE CHECK STATUS WITH THE ENGINEER.
General |
|
Product type | Cone driver |
Brand | Peerless |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 15.5 inch |
Frequency coverage type | Low |
Manufacturer sensitivity | 97.11 dB |
Calculated sensitivity | 97.62 dB |
Nominal power handling | 1200 W |
Fundamental parameters |
|
Sd | 870.9 cm² |
Mms | 117.42 gr |
Cms | 76 µm/N |
Le | 0.68 mH |
Re | 5.23 ohm |
BL | 25.07 T.m |
Small signal parameters |
|
Fs | 53.2 Hz |
Qes | 0.33 |
Qms | 8.66 |
Qts | 0.32 |
Vas | 82.91 L |
Datas |
|
Xmax | ±7 mm |
EBP | 161 Hz |
Zmin | 6.52 ohm |
Fs / Qts | 166 Hz |
Vas * Qts² | 8.49 L |
Calculated efficiency | 3.64 % |
Weight | ~15 kg |
Dimensions |
|
Voice coil diameter | 4 inch |
Gap height | 12 mm |
Outside diameter | 393 mm |
Baffle cutout diameter | 353 mm |
Front thickness | 13.9 mm |
Depth after front | 185 mm |
Diamètre aimant (mm) | 147 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
Basket masterial | Aluminium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.