Eighteen Sound |
ND2080 |
ND2080-8 |
DRV202080TI08NA |
Compression driver |
Sold by piece |
|
Brand Eighteen Sound |
Model ND2080 |
TLHP code ND2080-8 |
Manufacturer code DRV202080TI08NA |
||
Product type Compression driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 11 weeks
The ND2080 2-inch exit high frequency compression driver has been designed for high quality sound systems application.
The titanium diaphragm is produced in house and has been developed to assure unmatched transient response. The diaphragm assembly is made by joining the former directly to the titanium dome on its upper bend edge. In comparison with a usual straight former joint, the driver design assures extended frequency energy transfer for improved response linearity and unparallel reliability. This feature allows proper motion control of the dome in real working conditions. A proprietary treated Nomex former is used as Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in higher moisture content environments.
The ND2080 powerful neodymium magnet assembly has been designed to obtain 22KGauss in the gap for major benefits in transient response. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effect and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures.
The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value.
Due to the increasing use of high power audio systems at outdoor events or in marine environments, the ability of equipment to perform properly under inclement weather conditions is a key feature of Eighteen Sound philosophy. Hence, a special treatment is applied to the magnet and the top and back plates of the magnetic structure making the driver more resistant to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment used by other manufacturers.
110 dB SPL 1W / 1m average sensitivity
2 inch exit throat
3 inch edgewound aluminum voice coil
200 W program power handling
Pure Titanium diaphragm assembly
Neodymium ring magnetic structure
Excellent thermal exchange
General |
|
Product type | Compression driver |
Brand | Eighteen Sound |
Reference | ND2080 |
Product code | DRV202080TI08NA |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 5 inch |
Manufacturer sensitivity | 110 dB |
Nominal power handling | 100 W |
Max power handling | 200 W |
Bandwidth | 500÷20000 Hz |
Recommended min cutoff frequency | 800 Hz |
Exit dimension | 2 inch |
Datas |
|
Flux density | 2.2 T |
Zmin | 8 ohm |
Weight | ~3.4 kg |
Dimensions |
|
Voice coil diameter | 3 inch |
Outside diameter | 131 mm |
Depth | 99 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
|
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.