Mundorf
€70.40 IT/piece |
Air foil coil Mundorf CFC16, 10mH ±2%, 1.5ohm, Ø24xL115mm
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation. |
Mundorf
€59.69 IT/piece |
Mundorf BL71 air core coil, 27mH ±2%, 5.95ohm, 0.71mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |
Mundorf
€15.05 IT/piece |
Mundorf H125 ferrite core coil, 1.2mH ±3%, 0.12ohm, 1.25mm OFC-copper wire, Ø35xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H125-1,2
H125-1,2
|
Mundorf
€7.75 IT/piece |
Air core coil Mundorf L71, 2mH ±2%, 1.31ohm, Ø20xL40mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-2,00
L71-2,00
|
Mundorf
€24.68 IT/piece |
Mundorf L140 air core coil, 0.82mH ±2%, 0.26ohm, 1.40mm OFC-copper wire, Ø58xH28mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L140-0,82
L140-0,82
|
Mundorf
€21.77 IT/piece |
Mundorf H140 ferrite core coil, 2.2mH ±3%, 0.14ohm, 1.40mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H140-2,2
H140-2,2
|
Mundorf
€18.70 IT/piece |
Mundorf VLCU18 paper air copper foil coil, 0.22mH ±2%, 0.2ohm, 11.5x0.07mm OFC-copper wire, Ø40xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,22
VLCU18-0,22
|
Mundorf
€6.57 IT/piece |
Mundorf BL71 air core coil, 0.22mH ±2%, 0.38ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,22
BL71-0,22
|