Mundorf
€84.02 IT/piece |
Air core coil Mundorf L140, 22mH ±2%, 2.1ohm, 105x93xH79mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering. |
Mundorf
€68.23 IT/piece |
Mundorf LL45 litz wire air core coil, 2.7mH ±2%, 0.76ohm, 7x0.45mm OFC-copper wire, Ø77xH28mm, with backed varnish wire
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL45-2,7
LL45-2,7
|
Mundorf
€45.29 IT/piece |
Mundorf BS180 feron core coil, 1.8mH ±3%, 0.09ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 106x34xH34mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
€5.06 IT/piece |
Air core coil Mundorf BL71, 0.056mH ±2%, 0.16ohm, Ø10xL25mm, with backed varnish
BL71-0,056
BL71-0,056
|
Mundorf
€5.82 IT/piece |
Mundorf L100 air core coil, 0.1mH ±2%, 0.14ohm, 1.00mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-0,10
L100-0,10
|
Mundorf
€42.61 IT/piece |
Mundorf CFC16 air copper foil coil, 1.5mH ±2%, 0.47ohm, 17x0.07mm OFC-copper wire, Ø65xH24mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC16-1,50
CFC16-1,50
|
Mundorf
€11.35 IT/piece |
Air core coil Mundorf BL71, 3mH ±2%, 1.63ohm, Ø20xL40mm, with backed varnish
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-3,00
BL71-3,00
|
Mundorf
€8.11 IT/piece |
Air core coil Mundorf L50, 3mH ±2%, 2.98ohm, Ø20xL30mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-3,00
L50-3,00
|